[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Unresolvable mail address
A copy of your message is being returned to you because one or more of
the addresses you specified could not be recognized as addresses that are
understood by, or reachable from, this system.
Typically this means that a UUCP site you are trying to reach does not exist
in the UUCP maps, or that a domain name does not exist in the DNS, and
therefore cannot receive mail.
Please check your addresses for spelling errors, or consult with your local
postmaster or system administrator.
This is an automatic message.
P.S.: In bizarre circumstances you will see the address report below
rewritten as site.dom!user@%s. This happens when your envelope
address looks like user@site.dom, where site.dom is not a valid
hostname.
error: unresolvable: ebourne@fcgate.maplesoft.on.ca
------- Original Message follows -------
external
rcvdfrom wildecho.maplesoft.on.ca ([192.139.233.5])
with SMTP
from <tp750@CS.UTK.EDU>
to <ebourne@fcgate.maplesoft.on.ca>
Received: from qmgate (qmgate.maplesoft.on.ca) by wildecho.maplesoft.on.ca with SMTP id AA23644
(5.65c/IDA-1.4.4 for <ebourne@fcgate.maplesoft.on.ca>); Tue, 9 Apr 1996 16:41:41 -0400
Message-Id: <n1383057837.20887@qmgate>
Date: 1 Mar 1996 12:40:27 U
From: tp750@CS.UTK.EDU
Subject: <C> tp750 digest for Fri, 0
To: "tp750-digest-recipients:;" <tp750-digest-recipients:#059#@CS.UTK.EDU>
X-Mailer: Mail*Link SMTP/QM 3.0.0
Mail*Link(r) SMTP tp750 digest for Fri, 01 Mar 1996
!!! Original message was too large.
!!!
!!! It is contained in the enclosure whose name
!!! is the same as the subject of this message.
!!!
!!! A preview of the message follows:
Today's topics:
irq's used by pcmcia devices ? (Doug Fairclough)
Re: MWAVE stopped working under Win3.1 (Doug Fairclough)
755cx w/NEC 3FGe (Michael Klenner)
IBM 750CE PASSWORD (JAMES PEEK)
Re: irq's used by pcmcia devices ? (Stuart F. Biggar)
PCMCIA (Don Whiteside)
Re: IBM 750CE PASSWORD (Don Whiteside)
Instructions for upgrading harddrive? (Bob Cowles)
Re: doom2 (Doug Fairclough)
Re: IBM 750CE PASSWORD (Steve Hultquist)
Re: IBM 750CE PASSWORD (Steve Hultquist)
Re: IBM 750CE PASSWORD (David McAnally)
Re: IBM 750CE PASSWORD (Alex Judd)
Re: IBM 750CE PASSWORD (Thor Jensen)
Re: doom2 (Lee Hounshell)
Sleep mode on a 701 (Julie A. Strietelmeier)
PCMCIA IRQ and Win95 (Alex Judd)
Re: TP750CE Password (JACK SHU)
Re: IBM 750CE PASSWORD (Mike O'Carroll)
unsubscribe tp750 digest mailling list (Tom Lafleur)
How to 28.8Kbps on Megahertz XJ2288 PCMCIA Modem?
(=?iso-8859-1?Q?=C9ric_Tr=E9panier?=)
Re: IBM 750CE PASSWORD (Robert Dewar)
Re: How to 28.8Kbps on Megahertz XJ2288 PCMCIA Modem? (Michael Klenner)
Re: Sleep mode on a 701 (John H. Kim)
******************* NOTE *******************
There may be important message content
contained in the following MIME Information.
********************************************
------------------ MIME Information follows ------------------
------------------------------
Content-type: text/plain; charset=us-ascii
Content-description: Today's topics
<<<<<< See above "Message Body" >>>>>>
------------------------------
Date: Thu, 29 Feb 1996 13:57:25 -0800
From: Doug Fairclough <kensey@wired.com>
To: tp750@cs.utk.edu
Subject: irq's used by pcmcia devices ?
Message-Id: <Pine.BSD/.3.91.960229135506.22108G-100000@get.wired.com>
is there a way to find this out ? i cant seem to find this anywhere,
control panel, thinkpad advisor etc. my motivation is not being able
to use 2 pcmcia devices concurrently.
thanks !
doug
------------------------------
In-Reply-To: <96Feb27.225230est.144005@explorer.dgp.toronto.edu>
Date: Thu, 29 Feb 1996 14:02:51 -0800
From: Doug Fairclough <kensey@wired.com>
To: Eugene Fiume <elf@dgp.toronto.edu>
CC: tp750@cs.utk.edu
Subject: Re: MWAVE stopped working under Win3.1
Message-Id: <Pine.BSD/.3.91.960229135755.22108H-100000@get.wired.com>
not a clue ! my mwave modem stopped working after i installed a
pcmcia modem.
you ~may~ want to reinstall the mwave dos, then the mwave windows.
doug
On Tue, 27 Feb 1996, Eugene Fiume wrote:
> I don't recall making any system changes, but suddenly my MWAVE modem
> under Windows 3.1 has stopped working. Everything works fine under
> DOS, but executing mwmwin within mww\modem no longer fires up the modem.
> All my sound stuff is toast too. I tried to reinstall MWAVE2 for windows,
> but I got a truly informative message saying that I have -1 bytes
> remaining on my drive. It does make me worry about disk problems, but
> everything else on my drive including Linux seems to be fine. Anyone
> have any ideas on this one? I'm really trying to avoid editorial
> comments about Windows, but ooooh it's hard.
>
> Cheers,
> Eugene Fiume.
>
>
------------------------------
Date: Thu, 29 Feb 1996 20:09:18 -0500
From: Michael Klenner <klennerm@is.nyu.edu>
To: TP750@CS.UTK.EDU
Subject: 755cx w/NEC 3FGe
Message-Id: <2.2.32.19960301010918.00676868@is.nyu.edu>
Hi,
I recently acquired an NEC3FGe for use with my 755cx and Dock II. Right
now, I'm just using Win95's built in 755cx video driver at 800x600/256
Colors. This is mt preferred mode of operation. However, the screen
flicker on my 3FGe is horrible. How can I make adjust the refresh rate?
Should I go to the IBM VESA driver loaded from DOS? Any other options?
-Michael
---
Michael Klenner East: klennerm@is.nyu.edu
New York University West: mklenner@pacificnet.net
Tisch School of the Arts http://pages.nyu.edu/~mdk1143
Institute of Film & Television talk: michael@24frames.com
---
-----
<<<<<< Attached TEXT file named "tp750 digest for Fri, 01 Mar 19" follows
>>>>>>
Received: by qmgate with SMTP;1 Mar 1996 12:35:13 U
Received: from CS.UTK.EDU by wildecho.maplesoft.on.ca with SMTP id AA12999
(5.65c/IDA-1.4.4 for <ebourne@maplesoft.com>); Fri, 1 Mar 1996 12:32:40
-0500
Received: from localhost by CS.UTK.EDU with SMTP (cf v2.9s-UTK)
id MAA08287; Fri, 1 Mar 1996 12:16:04 -0500
Date: Fri, 1 Mar 1996 12:16:03 -0500
From: <owner-tp750@CS.UTK.EDU>
Received: by CS.UTK.EDU (bulk_mailer v1.4); Fri, 1 Mar 1996 12:16:03 -0500
To: tp750-digest-recipients:;
Subject: tp750 digest for Fri, 01 Mar 1996
Reply-To: tp750@CS.UTK.EDU
Mime-Version: 1.0
Content-Type: multipart/digest; boundary="----------------------------"
Message-Id: <bulk.8282.19960301121603@CS.UTK.EDU>
Today's topics:
irq's used by pcmcia devices ? (Doug Fairclough)
Re: MWAVE stopped working under Win3.1 (Doug Fairclough)
755cx w/NEC 3FGe (Michael Klenner)
IBM 750CE PASSWORD (JAMES PEEK)
Re: irq's used by pcmcia devices ? (Stuart F. Biggar)
PCMCIA (Don Whiteside)
Re: IBM 750CE PASSWORD (Don Whiteside)
Instructions for upgrading harddrive? (Bob Cowles)
Re: doom2 (Doug Fairclough)
Re: IBM 750CE PASSWORD (Steve Hultquist)
Re: IBM 750CE PASSWORD (Steve Hultquist)
Re: IBM 750CE PASSWORD (David McAnally)
Re: IBM 750CE PASSWORD (Alex Judd)
Re: IBM 750CE PASSWORD (Thor Jensen)
Re: doom2 (Lee Hounshell)
Sleep mode on a 701 (Julie A. Strietelmeier)
PCMCIA IRQ and Win95 (Alex Judd)
Re: TP750CE Password (JACK SHU)
Re: IBM 750CE PASSWORD (Mike O'Carroll)
unsubscribe tp750 digest mailling list (Tom Lafleur)
How to 28.8Kbps on Megahertz XJ2288 PCMCIA Modem?
(=?iso-8859-1?Q?=C9ric_Tr=E9panier?=)
Re: IBM 750CE PASSWORD (Robert Dewar)
Re: How to 28.8Kbps on Megahertz XJ2288 PCMCIA Modem? (Michael Klenner)
Re: Sleep mode on a 701 (John H. Kim)
******************* NOTE *******************
There may be important message content
contained in the following MIME Information.
********************************************
------------------ MIME Information follows ------------------
------------------------------
Content-type: text/plain; charset=us-ascii
Content-description: Today's topics
<<<<<< See above "Message Body" >>>>>>
------------------------------
Date: Thu, 29 Feb 1996 13:57:25 -0800
From: Doug Fairclough <kensey@wired.com>
To: tp750@cs.utk.edu
Subject: irq's used by pcmcia devices ?
Message-Id: <Pine.BSD/.3.91.960229135506.22108G-100000@get.wired.com>
is there a way to find this out ? i cant seem to find this anywhere,
control panel, thinkpad advisor etc. my motivation is not being able
to use 2 pcmcia devices concurrently.
thanks !
doug
------------------------------
In-Reply-To: <96Feb27.225230est.144005@explorer.dgp.toronto.edu>
Date: Thu, 29 Feb 1996 14:02:51 -0800
From: Doug Fairclough <kensey@wired.com>
To: Eugene Fiume <elf@dgp.toronto.edu>
CC: tp750@cs.utk.edu
Subject: Re: MWAVE stopped working under Win3.1
Message-Id: <Pine.BSD/.3.91.960229135755.22108H-100000@get.wired.com>
not a clue ! my mwave modem stopped working after i installed a
pcmcia modem.
you ~may~ want to reinstall the mwave dos, then the mwave windows.
doug
On Tue, 27 Feb 1996, Eugene Fiume wrote:
> I don't recall making any system changes, but suddenly my MWAVE modem
> under Windows 3.1 has stopped working. Everything works fine under
> DOS, but executing mwmwin within mww\modem no longer fires up the modem.
> All my sound stuff is toast too. I tried to reinstall MWAVE2 for windows,
> but I got a truly informative message saying that I have -1 bytes
> remaining on my drive. It does make me worry about disk problems, but
> everything else on my drive including Linux seems to be fine. Anyone
> have any ideas on this one? I'm really trying to avoid editorial
> comments about Windows, but ooooh it's hard.
>
> Cheers,
> Eugene Fiume.
>
>
------------------------------
Date: Thu, 29 Feb 1996 20:09:18 -0500
From: Michael Klenner <klennerm@is.nyu.edu>
To: TP750@CS.UTK.EDU
Subject: 755cx w/NEC 3FGe
Message-Id: <2.2.32.19960301010918.00676868@is.nyu.edu>
Hi,
I recently acquired an NEC3FGe for use with my 755cx and Dock II. Right
now, I'm just using Win95's built in 755cx video driver at 800x600/256
Colors. This is mt preferred mode of operation. However, the screen
flicker on my 3FGe is horrible. How can I make adjust the refresh rate?
Should I go to the IBM VESA driver loaded from DOS? Any other options?
-Michael
---
Michael Klenner East: klennerm@is.nyu.edu
New York University West: mklenner@pacificnet.net
Tisch School of the Arts http://pages.nyu.edu/~mdk1143
Institute of Film & Television talk: michael@24frames.com
---
------------------------------
Date: Thu, 29 Feb 1996 17:18:22 -0800
From: jlpeek@ix.netcom.com (JAMES PEEK )
To: TP750@CS.UTK.EDU
Subject: IBM 750CE PASSWORD
Message-Id: <199603010118.RAA10096@ix5.ix.netcom.com>
Help!!! We have an IBM 750ce laptop that we do not know the supervisor
password. The orginal owner died. IBM tells us that we have to replace
the motherboard and hard drive. We have already tried to disconnecting
the internal batteries.
Thanks
James L. Peek
jlpeek@ix.netcom.com
------------------------------
Date: Thu, 29 Feb 1996 18:20:58 -0700
From: "Stuart F. Biggar" <Stuart.Biggar@opt-sci.arizona.edu>
To: Doug Fairclough <kensey@wired.com>
CC: tp750@cs.utk.edu
Subject: Re: irq's used by pcmcia devices ?
Message-Id: <199603010120.SAA09738@mail.opt-sci.Arizona.EDU>
At 01:57 PM 2/29/96 -0800, you wrote:
>
>is there a way to find this out ? i cant seem to find this anywhere,
>control panel, thinkpad advisor etc. my motivation is not being able
>to use 2 pcmcia devices concurrently.
>
>thanks !
>
>doug
>
>
Doug,
If you installed the TP PCMCIA stuff under Windows or Warp, you should find
a PC Card Director
icon. Double click and double click on the slot with the card. If it is
configured, it should report
the IRQ and IO address block(s) used when configured. This of course
assumes that you have
the PCMCIA drivers correctly loaded in config.sys and for DOS/WIN have
EMM386 correctly set up
to give the PCMCIA drivers the correct size block of upper memory.
If you have the TP PCMCIA stuff, you might check to see if you are current.
You can download
the newest versions from www.pc.ibm.com and other IBM sites. There are some
fixes in the
later versions.
Some cards will not configure without a special enabling program. For
example, I have a
PCMCIA GPIB (IEEE-488 bus) card that will not enable until a special routine
which is linked
with the program I build runs. It will NOT work with OS/2 as it uses only
DOS CS/SS to enable.
If you run Warp, the system Info program can report quite a bit about
PCMCIA. Also, rmview /IRQ
will report interrupt usage and rmview /IO will report IO addresses.
Hope this helps,
Stuart
Stuart F. Biggar
Remote Sensing Group
Optical Sciences Center
University of Arizona
Stuart.Biggar@opt-sci.arizona.edu
Phone: 520-621-8168
Fax: 520-621-8292
------------------------------
Date: Thu, 29 Feb 1996 22:06:27 +0000
From: "Don Whiteside" <dwhite@shadow.net>
Reply-To: dwhite@shadow.net
To: tp750@cs.utk.edu
Subject: PCMCIA
Message-Id: <199603010208.VAA04049@anshar.shadow.net>
Just thought of it, I bought Systemsoft's Cardsoft Wizard Pro over
the weekend to see how well it worked. If you have never heard of it,
it's a 3rd party PCMCIA driver system that replaces your PCMCIA
drivers.
Systemsoft claims that their software automates dealing with a lot
of PCMCIA problems, though I didn't find it to be any more
impressive than EZ Play, though it may take slightly less memory
(75k DOS) and is a little slicker looking.. I haven't tried out the
power saving options yet, so I'm unsure how well it meshes with APM.
I talked to their tech support group once (over a problem that was
really my fault) and found them prompt, helpful and friendly. When I
called while they were busy, they responded to my voice mail message
in under 30 minutes and called me back at their expense (despite
their not having a toll-free support line).
I'm unsure if it's worth the $65 for Thinkpad owners who already have
pretty good PCMCIA support (I haven't tried any esoteric cards yet,
so it's possible this will come through in the long run if I try
anything out of the ordinary) but if any of you have friends with
laptops with less than stellar PCMCIA support, this might be a
decent product for them to look at.
standard marketing propaganda for the product can be found at
www.systemsoft.com
========================================================================
Donald Alan Whiteside School of Computer Science
Eternal Student Florida International University
GCS d-- -p+(---) l u+(-) e+ m+ s !n h f g+ w+ t+(++) r- y++
Penis ownership is not a prerequisite to technological competence." - Me
========================================================================
------------------------------
Date: Thu, 29 Feb 1996 22:06:27 +0000
From: "Don Whiteside" <dwhite@shadow.net>
Reply-To: dwhite@shadow.net
To: jlpeek@ix.netcom.com (JAMES PEEK ), tp750@cs.utk.edu
Subject: Re: IBM 750CE PASSWORD
Message-Id: <199603010208.VAA04044@anshar.shadow.net>
> Help!!! We have an IBM 750ce laptop that we do not know the supervisor
> password. The orginal owner died. IBM tells us that we have to replace
> the motherboard and hard drive. We have already tried to disconnecting
> the internal batteries.
The tech manual confirms what IBM told you - the supervisor password,
unlike the power on password, is not defeatable. I'd be suprised if
there wasn't some less drastic way, yet still requiring service, to
defeat it. It wouldn't be a total shock to me though.
However, if the data is the thing, there is nothing non-standard
about those hard drives and I am sure the password if just a
boot-related vent, not an encryption system of any sort. You could
probably remove the drive from the case, make it a slave drive and
attach it to an existing system (with the proper 44 pin -> 40 pin
adaptor, of course) and access the data that way. Not for the faint
of heart, obviously.
========================================================================
Donald Alan Whiteside School of Computer Science
Eternal Student Florida International University
GCS d-- -p+(---) l u+(-) e+ m+ s !n h f g+ w+ t+(++) r- y++
Penis ownership is not a prerequisite to technological competence." - Me
========================================================================
------------------------------
Date: Thu, 29 Feb 1996 21:07:29 -0500
From: rdc@pelican.cit.cornell.edu (Bob Cowles)
Reply-To: rdc@pelican.cit.cornell.edu
To: tp750@cs.utk.edu
Subject: Instructions for upgrading harddrive?
Message-Id: <9603010207.AA20967@pelican.cit.cornell.edu>
I recall that a few months ago there were some lively discussions
on upgrading the disk drive when you had to use the existing
Thinkpad caddy. I think that someone had detailed instructions
for doing that ... can anyone point me to them?
Once the drive is upgrades, is the Thinkpad BIOS autosensing
for the drive characteristics or just how do you enter the new
info?
Bob Cowles
rdc1@cornell.edu
------------------------------
In-Reply-To: <Pine.A32.3.91.960119194059.416168W-100000@hopi.gate.net>
Date: Thu, 29 Feb 1996 21:35:43 -0800
From: Doug Fairclough <kensey@wired.com>
To: Marshall Gilula <mgilula@gate.net>
CC: TP750@cs.utk.edu
Subject: Re: doom2
Message-Id: <Pine.BSD/.3.91.960229213444.10529A-100000@get.wired.com>
yeah, it ~runs~ on mine, but i have no dsp sound. is there something
you need to do for doom2 to have sound on a thinkpad 755cx ? anything
special to get sound ?
doug
On Fri, 19 Jan 1996, Marshall Gilula wrote:
> Doom2 runs great on my 755CD.
> -73-
>
> Marshall F. Gilula, M.D "El que mucho busca nada encuentra, pero
> mgilula@gate.net el que nada busca mucho encuentra"
> Co-Founder, MiamiNUG *****"People--Love 'em or leave 'em
alone!"*********
> Carpe resurrectionem mortuorum
>
> On Fri, 19 Jan 1996, Doug Fairclough wrote:
>
> >
> > so, no one on this list has doom2 on their thinkpad ?
> >
> > no one ?
> >
> > come on guys ! dont any of you have kids ?
> >
> > doug
> >
>
------------------------------
Date: Thu, 29 Feb 1996 22:37:24 -0700
From: Steve Hultquist <ssh@wwsi.com>
To: dwhite@shadow.net, jlpeek@ix.netcom.com (JAMES PEEK ), tp750@cs.utk.edu
Subject: Re: IBM 750CE PASSWORD
Message-Id: <2.2.32.19960301053724.00db769c@[166.93.8.14]>
At 10:06 PM 2/29/96 +0000, Don Whiteside wrote:
>However, if the data is the thing, there is nothing non-standard
>about those hard drives and I am sure the password if just a
>boot-related vent, not an encryption system of any sort. You could
>probably remove the drive from the case, make it a slave drive and
>attach it to an existing system (with the proper 44 pin -> 40 pin
>adaptor, of course) and access the data that way. Not for the faint
>of heart, obviously.
This may or may not be true. I was under the impression (may be wrong) that
the disk required the controller, and the controller was frozen by the PW.
Cheers,
ssh
--
Steve Hultquist Worldwide Solutions, Inc.
Distributed Systems and Internet Engineering Boulder, Colorado
------------------------------
Date: Thu, 29 Feb 1996 22:37:23 -0700
From: Steve Hultquist <ssh@wwsi.com>
To: jlpeek@ix.netcom.com (JAMES PEEK ), TP750@cs.utk.edu
Subject: Re: IBM 750CE PASSWORD
Message-Id: <2.2.32.19960301053723.00db0bbc@[166.93.8.14]>
At 05:18 PM 2/29/96 -0800, JAMES PEEK wrote:
>Help!!! We have an IBM 750ce laptop that we do not know the supervisor
>password. The orginal owner died. IBM tells us that we have to replace
>the motherboard and hard drive. We have already tried to disconnecting
>the internal batteries.
IBM is right. There is no other way.
Cheers,
ssh
--
Steve Hultquist Worldwide Solutions, Inc.
Distributed Systems and Internet Engineering Boulder, Colorado
------------------------------
In-Reply-To: "Mail dated 96/03/01 01:53:19 UT from (JLPEEK) JAMES PEEK"
Date: 29 Feb 1996 23:36:20 -0700
From: David McAnally <ACUS02@WACCVM.corp.mot.com>
Reply-To: David McAnally <ACUS02@WACCVM.corp.mot.com>
To: <TP750@cs.utk.edu>
Subject: Re: IBM 750CE PASSWORD
Message-Id: <"ACUS02 96/03/01 06:36:20.407140"@WACCVM.CORP.MOT.COM>
On 29 Feb 1996 18:18:22 -0700 JAMES PEEK (JLPEEK) wrote...
> Help!!! We have an IBM 750ce laptop that we do not know the supervisor
> password. The orginal owner died. IBM tells us that we have to replace
> the motherboard and hard drive. We have already tried to disconnecting
> the internal batteries.
After reading my 760C documentation concerning this, it would appear the
supervisor or hard disk passwords are not resettable, as you were told by
IBM. Since I've not heard of any way to get past this, your request has
prompted me to provide my supervisor password to management, just in
case. If by chance you do find a way, please let us know it's
possible.
I do like this feature though. The stories I've heard about securing PC
access on boot, floppy or idle timeout using some add on security
software is rife with support problems and system crashes. And we know
that using non volatile memory for power on password is just an
annoyance to thieves and the like. This method avoids messing with my
operating system(s) or boot record. All computers should have this
security feature. It should make the system less attractive to theft if
it can't be used without replacing the system board and hard drive.
Regards,
David McAnally
Specialist, Computer Applications
E-Mail: acus02@email.mot.com
------------------------------
In-Reply-To: <199603010118.RAA10096@ix5.ix.netcom.com> from "JAMES PEEK" at
Feb 29, 96 05:18:22 pm
Date: Fri, 01 Mar 1996 09:27:14
From: Alex Judd <ajudd@quantime.co.uk>
To: jlpeek@ix.netcom.com (JAMES PEEK)
CC: tp750@cs.utk.edu
Subject: Re: IBM 750CE PASSWORD
Message-Id: <1875.199603010927@tiree.quantime.co.uk>
Hmmm... One thing that might be worth trying is to remove the back-up
battery from the Thinkpad (used for the clock etc and lives just above
the battery on a 750CD), and the main battery and leave the machine for
a while. If the chip is NVRam or such it should discharge and loose any
data stored.
I really don't know if this will work, but might be worth a go,
Alex
>
> Help!!! We have an IBM 750ce laptop that we do not know the supervisor
> password. The orginal owner died. IBM tells us that we have to replace
> the motherboard and hard drive. We have already tried to disconnecting
> the internal batteries.
>
> Thanks
>
> James L. Peek
> jlpeek@ix.netcom.com
>
------------------------------
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Date: Fri, 01 Mar 1996 11:33:42 +0100
From: Thor Jensen <Thor.O.Jensen@aorg.uib.no>
To: dwhite@shadow.net, jlpeek@ix.netcom.com (JAMES PEEK ), tp750@cs.utk.edu
Subject: Re: IBM 750CE PASSWORD
Message-Id: <2.2.16.19960301103342.2b9f4ebe@golf.uib.no>
I had this problem on my old IBM LS40SX laptop. The only thing I had to to
whean all "safety/secrecy" talk was over, was to short-circuit a small
switch on the moterboard for 10 seconds- But it startet with the same "the
motherboard must be replaced"
Thor =D8ivind Jensen
Dep of Administration and Organization Theory
Univ of Bergen
phone +47 55 21 21 53 fax +47 55 32 12 89
mob: +47 946 246 90
------------------------------
Date: Fri, 01 Mar 1996 19:45:58 +0900
From: Lee Hounshell <lee@tokyo.tcs.co.jp>
To: kensey@wired.com, mgilula@gate.net
CC: TP750@cs.utk.edu
Subject: Re: doom2
Message-Id: <199603011045.TAA15367@edo.tokyo.tcs.co.jp>
>anything special to get sound ?
I attach my 755C to a dock-II equipped with an AWE-32 Soundblaster
and get pretty decent sound....
-Lee
------------------------------
Date: Fri, 01 Mar 1996 07:03:40 -0500
From: "Julie A. Strietelmeier" <julie@cel.cummins.com>
To: TP750@CS.UTK.EDU
Subject: Sleep mode on a 701
Message-Id: <9603011218.AA04354@gatekeeper.cummins.com>
How do I turn off the sleep mode on my 701? I use it 99.9% of the time
with the AC Adaptor plugged in... and quite often I use it to browse
the net and ftp files. It is real annoying with I turn my back to do
something else and the machine blanks the screen and goes to sleep.
When it does this, it will sometimes mess up file transfers in progress.
Thanks for any info.
______________________________________________________________________________
Julie Strietelmeier The AdeptSoft Support
BBS
julie@cel.cummins.com (812)342-6564
Columbus, IN bbs.adeptsoft.com
______________________________________________________________________________
------------------------------
Date: Fri, 01 Mar 1996 12:31:32 -0021
From: Alex Judd <ajudd@quantime.co.uk>
To: ajudd@quantime.co.uk (Alex Judd )
CC: tp750@cs.utk.edu
Subject: PCMCIA IRQ and Win95
Message-Id: <6569.199603011231@tiree.quantime.co.uk>
What OS are you using? I seem to remember much mail about Win95 so
I'll go with that.
With Win95 you need no PCMCIA drivers, so to avoid problems with 2
cards do the following.
1. Take the first card and plug it into SLOT 1. If you then run
START MENU -> ControlPanel -> Add New Hardware, it should find this
device. If you now go to START MENU -> Control Panel -> System, you can
see the device you have just added. Double click on this and goto the
resources tab. Here you can change the IRQ and Memory used by that
device.
2. Repeat above, and it should be possible to get the two not to clash.
Worth noting however that I actually disabled one of my COM: ports with
the Thinkpad software in order to have enough free IRQ's to allocated
to PCMCIA Modem, PCMCIA Ethernet and MWave Modem.
Alex
>
>
> is there a way to find this out ? i cant seem to find this anywhere,
> control panel, thinkpad advisor etc. my motivation is not being able
> to use 2 pcmcia devices concurrently.
>
> thanks !
>
> doug
>
------------------------------
Date: Fri, 01 Mar 1996 08:56:59 -0500
From: JACK SHU <JSHU@ecs.umass.edu>
To: TP750@cs.utk.edu
Subject: Re: TP750CE Password
Message-Id: <01I1THCIGV9UCF1C39@ecs.umass.edu>
what is this supervisor password? is this feature available on the 701?
thanks
Jack
------------------------------
Date: Fri, 01 Mar 1996 13:38:32 +0000
From: "Mike O'Carroll" <mike@filct.com>
To: tp750@cs.utk.edu
Subject: Re: IBM 750CE PASSWORD
Message-Id: <9603011338.aa16125@hipass.filct.com>
Well, I hope there isn't an easy way round it, or it defeats the object.
The crooks would probably get to know the method before the innocent user!
We had a similar problem with a Dell Latitude. In this case, Dell
had a "secret" password which they could use to unlock it. Sounds like
a reasonable compromise.
Mike
------------------------------
In-Reply-To: <bulk.8835.19960225121524@CS.UTK.EDU>
Date: Fri, 01 Mar 1996 06:17:17 -0800
From: Tom Lafleur <lafleur@qualcomm.com>
To: tp750@CS.UTK.EDU
Subject: unsubscribe tp750 digest mailling list
Message-Id: <v03005002ad5cb74d1c47@[129.46.91.182]>
unsubscribe tp750 digest mailling list
---------------------------------------------
Tom Lafleur
Qualcomm Inc.
(619) 658-3738
lafleur@qualcomm.com
------------------------------
Date: Fri, 01 Mar 1996 10:12:26 -0500
From: =?iso-8859-1?Q?=C9ric_Tr=E9panier?= <etrepani@qc.bell.ca>
To: "'Mwave Distribution List'" <mwave-l@watson.mbb.sfu.ca>,
"'ThinkPad Distribution List'" <TP750@cs.utk.edu>
Subject: How to 28.8Kbps on Megahertz XJ2288 PCMCIA Modem?
Message-Id: <01BB0757.982DACE0@blmi01-s05.QC.Bell.CA>
Hello everyone,
My ThinkPad (760CD) has Win95 configured with remote access to our company's
LAN.
I have the Mwave 2.1 drivers installed and a PCMCIA Megahertz XJ2288 modem.
With the Mwave modem, I always connect with my host at 28800 bps.
With the XJ2288 modem, only rarely do I connect at 28800. Most of the time
it connects at 26400 and sometimes at even lower speeds.
Why doesn't it connect at 28800 bps like the Mwave does?
This is with the same telephone line and cable.
Thanks for any help...
Eric
+---------------------+-----------------------------------+-----------------+
| Eric Trepanier | The opinions expressed above | Advertize Here! |
| etrepani@qc.bell.ca | are my own and do not represent | |
| (514) 391-8126 | my company's opinions in any way. | |
+---------------------+-----------------------------------+-----------------+
------------------------------
Date: Fri, 01 Mar 1996 10:09:00 -0500
From: dewar@gnat.com (Robert Dewar)
To: mike@filct.com, tp750@cs.utk.edu
Subject: Re: IBM 750CE PASSWORD
Message-Id: <9603011509.AA06279@nile.gnat.com>
Sounds terrible (Dell's secret password) that means that folks working
for Dell can get into your machine. I MUCH prefer IBM's answer!
------------------------------
Date: Fri, 01 Mar 1996 10:24:22 -0500
From: Michael Klenner <klennerm@is.nyu.edu>
To: =?iso-8859-1?Q?ric_Tr=E9panier_=3Cetrepani=40qc.bell.ca=3E?=@is.nyu.edu
CC: TP750@CS.UTK.EDU
Subject: Re: How to 28.8Kbps on Megahertz XJ2288 PCMCIA Modem?
Message-Id: <2.2.32.19960301152422.00683518@is.nyu.edu>
At 10:12 AM 3/1/96 -0500, you wrote:
>With the Mwave modem, I always connect with my host at 28800 bps.
>
>With the XJ2288 modem, only rarely do I connect at 28800. Most of the time
it
>connects at 26400 and sometimes at even lower speeds.
Ric,
What firmware revision are you running? Some of the later flash upgrades
solve connectivity problems but the resulting carrier speed is a trade-off.
With that being said, you should keep in mind that v.34 carriers re-train
regularly, and line conditions are such that a 28.8 connection rarely
maintains itself at that speed anyway.
-Mike
---
Michael Klenner East: klennerm@is.nyu.edu
New York University West: mklenner@pacificnet.net
Tisch School of the Arts http://pages.nyu.edu/~mdk1143
Institute of Film & Television talk: michael@24frames.com
---
------------------------------
In-Reply-To: <9603011218.AA04354@gatekeeper.cummins.com>
Date: Fri, 01 Mar 1996 10:48:13 -0500
From: "John H. Kim" <jokim@tuna.mit.edu>
To: "Julie A. Strietelmeier" <julie@cel.cummins.com>
CC: TP750@cs.utk.edu
Subject: Re: Sleep mode on a 701
Message-Id: <Pine.LNX.3.91.960301104603.4767B-100000@tuna.mit.edu>
The short answer is: Read the manual.
The long answer is to hit Fn-F1, then look through the many power
settings. One will be for suspend timeout, one will be for disk
spindown, one will be for screen blank, etc.
Incidently, you can have different settings for when your 701 is
on AC or battery. So just because it doesn't sleep when on AC
doesn't mean it won't sleep when on battery.
--
John H. Kim "A citizen of America will cross the ocean to fight
jokim@mit.edu for democracy, but won't cross the street to vote in
jokim@tuna.mit.edu a national election." -- Bill Vaughan
--------------------------------
End of tp750 Digest