Re: Asymetrix Digital Video Capture - disabled

["Mary Loftus" <mloftus@iol.ie>]

Thanks for your reply, Robert.  I've just checked the video controller in
Thinkpad Setup and it is configured as follows:

Video BIOS:	E8000h

Enhanced Video:	Enabled
Video Connector:	Video In / no video equipment (Smooth Playback)
IRQ for Video Capture:	IRQ9

Are these OK or is there a bigger problem?

Thanks again,

Mary



----------
> From: Robert G. Stevens <robsteve@ra.isisnet.com>
> To: Mary Loftus <mloftus@iol.ie>
> Subject: Re: Asymetrix Digital Video Capture - disabled
> Date: 13 August 1996 04:15
> 
> At 21:11 12/08/96 +0100, you wrote:
> >Could anyone send me the relevant WIN.INI and/or SYSTEM.INI entries
which
> >enable the video capture drivers and software on a Thinkpad 755 CDV.  I
> >have a Thinkpad 755 CDV - which has a video capture feature.  The
> >pre-loaded software for the video capture is Digital Video
Producer/Capture
> >by Asymetrix.
> >
> >I recently cleaned down the system, formatted the hard drive and
installed
> >Windows 95.  It worked great, cleared off a lot of rubbish and left me
an
> >extra 400mb of hard drive space.  I re-installed all the Thinkpad
features
> >and programmes and new BIOS and utilities from IBM's Thinkpad Web Page,
all
> >without a hitch, EXCEPT for the video capture software.  Windows 95
reports
> >the video-capture driver is present and working normally and the Digital
> >Video Producer software is working, BUT the video capture module ain't.
> >
> The problem is that you do not have the advanced video features enabled
and
> the capture irq enabled.  This can be found in thinkPad setuo and video
> controller.
> 
> 
> Regards 
> 
> Robert Stevens