[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
TP 750 Technical Question
- To: thinkpad@cs.utk.edu
- Subject: TP 750 Technical Question
- From: "daniel (d.) hammett" <dhammett@nortel.ca>
- Date: Mon, 29 Jul 1996 07:41:00 -0400
- Sender: "daniel (d.) hammett" <dhammett@nortel.ca>
- X400-Content-Type: P2-1984 (2)
- X400-Mts-Identifier: [/PRMD=BNR/ADMD=TELECOM.CANADA/C=CA/;bcars520.b.537:29.06.96.11.41.55]
- X400-Originator: /dd.id=0504153/g=daniel/i=d/s=hammett/@bnr.ca
- X400-Received: by mta bnr.ca in /PRMD=BNR/ADMD=TELECOM.CANADA/C=CA/; Relayed; Mon, 29 Jul 1996 07:42:04 -0400
- X400-Received: by /PRMD=BNR/ADMD=TELECOM.CANADA/C=CA/; Relayed; Mon, 29 Jul 1996 07:41:55 -0400
- X400-Received: by /PRMD=BNR/ADMD=TELECOM.CANADA/C=CA/; Relayed; Mon, 29 Jul 1996 07:41:00 -0400
Hi Folks,
I'm sure this has been asked many times before, but
since I am new to this forum, I'll ask it again ...
Has anybody gathered enough information together to
try programming the audio sub-system on a TP750 yet?
I got a copy of the Crystal CS4248 data sheet, but it
is less detailed than I would like. I'm really only
interested in simple stuff to start off with.
Could someone point me in the right direction to any
information. I suppose the next step would be to look
at the ICM technical manuals for the 750, but I heard
someone say that these weren't very useful.
Thanks in advance for your help
Regards
Dan Hammett.
NORTEL Northern Telecom (NITEC)
Phoenix Customer Support
Email: dhammett@nortel.ca
---- All my opinions are my own. ----
P.S If this message is badly formatted,
blame COCOS or XRN, not me!