How to install Warp on a 755CD ?

[g_prosser@cix.compulink.co.uk (Gerry Prosser)]

First, you need about 40MB spare on your hard drive. Once you have got 
that, do the following:

1. with the cdrom drive installed:

   a) save the disk0.dsk and dsk1.dsk images out of \diskimgs\os2\35
      - I believe you can use the ones provided with the warp       
distribution package, but they waste time sniffing around your       
system for ide and scsi cdrom drives.
      
   b) xcopy /s /e the whole of the os2image library (inc all its sub-
      directories) to your hard drive
      
2. swap your cdrom for the diskette drive:

   a) cut your new disk0 and disk1 images using loaddskf /y/q/f
   
   b) edit config.sys on disk 1 to add 'set sourcepath=d:\os2image' (or
      whatever you xcopy'd to) as the last statement
      
   c) copy the new disk0 and disk1 diskettes to \os2image\disk_0 and      
   \os2image\disk_1, respectively
      
3. cross your fingers, shutdown the ThinkPad, and re-boot from the new    
install diskette (disk0).
   
Gerry
      
    

-------- Original Message --------