Re: Help with Qlogic PCMCIA SCSI card setup! (fwd)

[wba@maverick.uhc.com (John Albindia)]

It takes forever for the MSDEX to load, the ASPI driver does not
display my drive type (NEC 3XP), and a DIR of the assigned drive
letter gets a CDR101 error.  Could you please send me your config.sys
and c:\qlog\csalloc.ini file?  I think it is the irq's and memory
exclude statements that is screwing me up.  Thanks!
Forwarded message:
> From yetseng@top.cis.syr.edu Thu Oct 13 11:44:32 1994
> Date: Thu, 13 Oct 1994 12:43:03 -0400 (EDT)
> From: Yen-Chiun Tseng <yetseng@top.cis.syr.edu>
> Subject: Re: Help with Qlogic PCMCIA SCSI card setup!
> To: John Albindia <wba@maverick.uhc.com>
> In-Reply-To: <9410131507.AA36969@maverick.uhc.com>
> Message-Id: <Pine.3.89.9410131208.A23157-0100000@top.cis.syr.edu>
> Mime-Version: 1.0
> Content-Type: TEXT/PLAIN; charset=US-ASCII
> Content-Transfer-Encoding: QUOTED-PRINTABLE
> 
> 
> 
> On Thu, 13 Oct 1994, John Albindia wrote:
> 
> > Can someone using Qlogic PCMCIA card (SCSI-adapter) with a CD-ROM please
> > help ?.
> > I need to see the Config.sys and Csalloc.ini setup.
> > Also which socket is the card plugged into, or does it matter?
> >=20
> 
>   What's kind of problems? A few weeks ago, I used Q-logic SCSI card w/o
>   any problem. E-mail me if you have any problem.
> 
>   -yc
> 
> =DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=
> =DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=
> =DB=DB=DB=DB=DB=DB=DB=DB=DB=DB
>     Yen-chiun Tseng                     YC/// =20
>     E-mail://yetseng@mailbox.syr.edu   o|^|^|o =20
>     or     //yetseng@top.cis.syr.edu     \-/  ~ Hello
> =DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=
> =DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=DB=
> =DB=DB=DB=DB=DB=DB=DB=DB=DB=DB
> 
> 
>