[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Dial-Up Networking for TP701CS

To: "'Cho Moon'" <cmoon@lscsjc.lattice.com>, "thinkpad@cs.utk.edu" <thinkpad@cs.utk.edu>
Subject: RE: Dial-Up Networking for TP701CS
From: Joshua Gerber <jgerber@adnc.com>
Date: Sun, 5 May 1996 12:06:53 -0700
Cc: "support@rahul.net" <support@rahul.net>

On Friday, May 03, 1996 6:03 PM, Cho Moon[SMTP:cmoon@lscsjc.lattice.com] wrote:
>Hello,
>
>I'm trying to use Win95's Dial-Up Networking tool to connect my
>TP701CS to an internet service provider (a2i).  The IBM internal modem
>dials the ISP, verifies the user name and password, but fails after
>printing the following message:
>
>Dial-up Networking could not negotiate a compatible set of network
>protocols you specified in the Server Type settings.  Check your
>network configuration in the Control Panel then try the connection
>again.

Go to your network control panel, select TCP/IP-->DialUp adapter, select Properties, then the Advanced tab, then check off "Set this protocol to be the default protocol". That should do it.

-j

Prev by Date: Re: portable printer recommendation wanted
Next by Date: mailing list
Prev by thread: Dial-Up Networking for TP701CS
Next by thread: Re: Dial-Up Networking for TP701CS
Index(es):
- Date
- Thread