Vertical Scan Rates TP760 CD with Windows 95 HELP!

[Richard Chalk <rchalk@mindspring.com>]

                                I have a 760CD which was originally loaded
with Windows 3.11/OS/2.  In that configuration, I was able to set the
vertical scan at 800x600 to 72 HZ, and it worked fine using an external
monitor (NEC 5FG)

I loaded Windows 95, and everything was fine, selecting NEC 5FG as the
display type, and loading the correct drivers from the IPM web page, and
using the Thinkpad/Cyber..whatever...selection.

I tried setting MPEG Playback on, and that works, but it reduces the
vertical rate..I presume to 60 HZ, for video compatibility.  However, when I
disable enhanced video, and disable MPEG, the computer reboots in 60 Hz
mode.  I can run "ps2 vsync 800x600 72" and it will reset, but it no longer
remembers, and reboots at the slower mode all the time.

I don't know where this data is stored.  Can anyone help?

Thanks,
Richard

Richard Chalk			PHONE: 770-992-3700
4330 Sprucebough Drive		FAX:         770-998-3781
Marietta, GA  30062			EMAIL: rchalk@mindspring.com