Re: Linux on TP755CE? - booting problems (ADDITIONAL INFO)

[Valentine Anantharaj <val@cast.msstate.edu>]

I forgot to mention that I was using the boot disk from the Slackware 2.2 
distribution from tsx-11.

VGA


Valentine G. Anantharaj --------------- val@cast.msstate.edu ---
MSU - Center for Air-Sea Technology     vga1@ra.msstate.edu    |
Bldg. 1103, Room 233                    Tel.: (601)688-1157    |
Stennis Space Center                    Fax:  (601)688-7100    |
MS 39529-5005 --------------------------------------------------

---------- original message  message ----------
Date: Wed, 2 Aug 1995 15:44:01 +36000
From: Valentine Anantharaj <val@cast.msstate.edu>
To: tp750@cs.utk.edu
Cc: Valentine Anantharaj <val@cast.msstate.edu>
Subject: Re: Linux on TP755CE? - booting problems


I am having problems booting-up.  I have tried 3 different sets of 
boot/root disks.

I downloaded the latest from tsx-11 and tried the bare.gz and net.gz boot 
disks after gunzipping them and rawriting to floppies.  The HD geometry 
seems to be recognized fine - it detects the 3 partions correctly.

I get these errors:

  RAMDISK: 1474560 bytes starting at 0x....
  VFS: insert ramdisk floppy
  RAMDISK: Loading 1440 blocks into RAMDISK ..............................
  ...................

  child XXX died with code ff00

The last line keeps repeating in aloop with XXX incremented each time.  I 
had to reboot with the same problem.


I also tried Dave Hind's (ftp://cb-iris.stanford.edu/pub/pcmcia) 
boot/root disks with PCMCIA support.  But I had a different problem.  The 
RAMDISK loaded fine.

  RAMDISK: loading 1440 blocks ....

  done.
  VFS: mounted root (minix filesystem)
  init: can't load library '/libc.so.4'
        No such library


I am stumped at this point.  I could use another sey of boot/root disks 
and give it a try.

Any idea what I may be doing wrong?


Regards,

VGA


Valentine G. Anantharaj --------------- val@cast.msstate.edu ---
MSU - Center for Air-Sea Technology     vga1@ra.msstate.edu    |
Bldg. 1103, Room 233                    Tel.: (601)688-1157    |
Stennis Space Center                    Fax:  (601)688-7100    |
MS 39529-5005 --------------------------------------------------