[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

WIN95 & Thinkpads (VERY Long!)



Version 1.30 of the system diskette is out for the 755CE and UP models
Version 1.20 of the system diskette is out for the 355/360/750/755 models


Windows 95 Beta Program on IBM ThinkPad Systems
===============================================



                                                           Version 1.00


                                                        July 10th, 1995


                                                       IBM UNCLASSIFIED

Important Notice:
-----------------
This document  contains  the information for customers  who want to run
Windows  95  Beta  program  on IBM  ThinkPad systems.    IBM is closely
working with  Microsoft  to ensure  the compatibility of  Windows 95 on
selected ThinkPad systems  when it is commercially available.  However,
IBM is not responsible for support of beta release of software from any
third parties and cannot guarantee compatibility or support for Windows
95 shipped prior to  its commercial  release.   The information in this
document  doesn't imply  that  IBM is providing  official  support  for
Windows 95 beta program.  The information in this document  is provided
"as is" without warranty of any kind.   The entire risk  arising out of
the use of information in this document remains with you.


(Note) Microsoft and Windows are trademarks of Microsoft Corporation.


                                          IBM Personal Computer Company
-----------------------------------------------------------------------

Table of Contents
=================
1. Before installing Windows 95
 1.1. How to get the updated software
 1.2. System program update
 1.3. Removing incompatible preinstalled software
 1.4. Before installing Windows 95
2. ThinkPad 755C/Cs and systems
 2.1. Install and setup Windows 95 on ThinkPad
 2.2. Known limitations and problems with Windows 95 beta program
3. ThinkPad 360/355 Family and 370C systems
 3.1. Install and setup Windows 95 on ThinkPad
 3.2. Known limitations and problems with Windows 95 beta program
4. ThinkPad 340CSE systems
 4.1. Install and setup Windows 95 on ThinkPad
 4.2. Known limitations and problems with Windows 95 beta program
5. ThinkPad 755CE/CSE/CX/CD/CDV systems
 5.1. Install and setup Windows 95 on ThinkPad
 5.2. Known limitations and problems with Windows 95 beta program
6. ThinkPad 701C system
 6.1. Install and setup Windows 95 on ThinkPad
 6.2. Known limitations and problems with Windows 95 beta program
7. ThinkPad 530Cs systems
 7.1. Install and setup Windows 95 on ThinkPad
 7.2. Known limitations and problems with Windows 95 beta program
8. System independent information
 8.1. Suspend command on Start menu
 8.2. System compatibility test in Windows 95 DDK beta
 8.3. PCMCIA adapter card compatibility
 8.4. PCMCIA support software setup
 8.5. ThinkPad Docking control utility
 8.6. ThinkPad Dock II docking station
9. Other ThinkPad systems
 9.1. ThinkPad 750 systems
 9.2. ThinkPad 340 system
 9.3. ThinkPad 230Cs system
 9.4. Other ThinkPad systems

-----------------------------------------------------------------------

1. Before installing Windows 95
-------------------------------
1.1. How to get the updated software
------------------------------------
   IBM PC Company is providing the updated software through several
  channels as follows.  It is suggested to get the latest software
  from those channels so that you can set up Windows 95 on your
  ThinkPad systems with the information described in this document.

  <IBM PC Company BBS>
  Use a terminal emulation software and modem to connect the IBM PC
  Company BBS in the US.  The phone number is;

  919-517-0001.

  <CompuServe ThinkPad Forum>
  Join CompuServe ThinkPad Forum (GO THINKPAD) and download the
  necessary software from the library.

  <FTP site>
  The IBM PC Company FTP server address for mobile product software
  fixes and patches is;

  ftp://ftp.pcco.ibm.com/pub/mobiles

  <WWW server>
  The home page for IBM PC Company file library index is;

  http://www.pc.ibm.com/files.html

  Select "IBM Portables, Notebooks, Laptops Files" to find the
  necessary software.

  If you cannot get the updated software from either one, please
  contact your IBM representative, or contact IBM HelpCenter (1-800-
  772-2227) for more information.


1.2. System program update (Flash BIOS update)
----------------------------------------------
   Before you install Windows 95, you are strongly recommended to get
  the following version of ThinkPad System Program Service Diskette
  and to update your flash BIOS.  Otherwise, Windows 95 may not run
  as explained in this document.  You need to follow the instructions
  provided by the system program service diskette very carefully to
  update your flash BIOS program.  Your system could be damaged by
  incorrect operations during this system program update.

  <Important!>---------------------------------------------------------
   The preview program version of Windows 95 beta and earlier versions
  have a problem with IBM ThinkPad System Program Service Diskettes.
  You MUST turn on the write-protect switch of your ThinkPad System
  Service Diskette right after you create the diskette from its source
  file.  If you don't, Windows 95 could damage the diskette when you
  write some data on it, or use "DIR" command against it.  In this
  case, the diskette no longer works as a system service diskette and
  you need to recreate a diskette from the source diskette image.
  ---------------------------------------------------------------------

  <System Program Service Diskettes for ThinkPads>
  ThinkPad 750 Family - ThinkPad 750/360/755 Family System Program
                        Service Diskette version 1.20 or later.

  ThinkPad 755C/Cs    - ThinkPad 750/360/755 Family System Program
  and 360/355 Family    Service Diskette version 1.20 or later.

  ThinkPad 755CE/CD   - ThinkPad 755 Family System Program Service
           755CX/CV     Diskette version  1.30 or later.
           755CDV

  ThinkPad 701C       - ThinkPad 701C System Disk version 3H or
                        later.

  ThinkPad 340 CSE    - ThinkPad 340 Family System Program Service
  and 370C              Diskette version  1.10 or later.

  Note 1: IBM is testing the following ThinkPad systems with Windows 95
          and APM (Advanced Power Management) BIOS 1.1 and PnP (Plug
          and Play) BIOS 1.0a are supported on those systems.

          - ThinkPad 755C/Cs
          - ThinkPad 360/355 Family
          - ThinkPad 755CE/CD/CX/CV/CDV
          - ThinkPad 340CSE
          - ThinkPad 370C
          - ThinkPad 701C
          - ThinkPad 530CS

       2. IBM is testing the following ThinkPad systems with Windows 95
          but only APM BIOS 1.0 is supported.  No PnP BIOS support is
          available on those systems.

          - ThinkPad 750 Family
          - ThinkPad 340 (Monochrome display system)
          - ThinkPad 230Cs

       3: IBM is not testing any other ThinkPad systems with Windows 95.
          Windows 95 may run on those legacy ThinkPad systems but IBM
          has/will not test Windows 95 on those systems.

1.3. Removing incompatible preinstalled software
------------------------------------------------
   If you plan to install, or have already installed Windows 95 beta
  program over the following ThinkPad systems with factory preinstalled
  software, you may encounter "Windows 95 Explorer Fault".

          - ThinkPad 755C/Cs
          - ThinkPad 360/355 Family
          - ThinkPad 755CE/CD
          - ThinkPad 340CSE
          - ThinkPad 370C
          - ThinkPad 701C

   If you have this problem, or to avoid this problem, please take the
  following steps.

    1. Edit your WIN.INI file located under C:\WINDOWS subdirectory.
       For example, type "E C:\WINDOWS\WIN.INI" and press ENTER from
       DOS command prompt.
    2. In [windows] section, find the "load=" statement.  Remove
       STRTSCR.EXE from the "load=" statement as follows.

       <Example>

       Your original WIN.INI
       ---------------------
       [windows]
       :
       load=C:\SCREENS\STRTSCR.EXE C:\THINKPAD\FUELWIN.EXE
       :

       Remove STRTSCR.EXE
       ------------------
       [windows]
       :
       load=C:\THINKPAD\FUELWIN.EXE
       :

    3. After you remove STRTSCR.EXE, you will no longer see the
       ThinkPad Welcome screen.  If you have already removed this
       screen, nothing will be changed by removing STRTSCR.EXE.

    Note: If your system is either ThinkPad 755CX or 755CV, the
          new STRTSCR.EXE on your system can be used on Windows 95
          beta program.

1.4. Before installing Windows 95
---------------------------------
   Before you install Windows 95 beta program, it is recommended
  to review the information which is particular to your ThinkPad
  model.  This would minimize your effort to set up Windows 95 beta
  program on your ThinkPad system.

-----------------------------------------------------------------------
2. ThinkPad 755C/Cs systems
---------------------------
2.1. Install and setup Windows 95 on ThinkPad
---------------------------------------------
2.1.0. Before you proceed
-------------------------
   Again, you are strongly recommended to get the latest system
  program service diskette and update your system BIOS.  Otherwise,
  the following information is not applicable on your system.

2.1.1. During Windows 95 installation
-------------------------------------
   You may encounter "Unknown Hardware Found" message when you install
  Windows 95 beta code.  In this case, select "Do not install a driver
  (Windows will not prompt you again)".  By doing this, you will see
  "Unknown Device" under "Other devices" in Windows 95 Device Manager.
  This "Unknown Device" is ThinkPad Audio device.  If you want to see
  this device name in Device Manager, refer to "Unknown Hardware"
  problem in Section 2.2.


2.1.2. Video device drivers
---------------------------
   The video device driver for ThinkPad 755C/Cs systems is included
  in Windows 95 and it is automatically installed by Windows 95
  Setup program.  You don't need ThinkPad Windows video device driver
  any longer but still need to install ThinkPad VESA video driver.
  The following procedure enables Windows 95 video device driver
  functions.

  <Important!>---------------------------------------------------------
  The following procedure is NOT applicable on ThinkPad 755CE/CD/CX/CV
  systems.
  ---------------------------------------------------------------------

  <Enabling Windows 95 Video device driver>
  1. Check your CONFIG.SYS file and look for the following statement.

     :
     DEVICE=C:\IBMVESA\VESA.EXE
     :
     (Note: The directory "C:\IBMVESA" could be different if you
      have installed ThinkPad DOS video device driver into a
      different subdirectory.)

     If you find the statement, your system is already set up for
     Windows 95 video device driver for ThinkPad.  If not, go to
     the next step.
  2. Have ThinkPad Video feature diskette.  (The latest version as
     of 6/1/95 is 1.33) and insert it into the diskette drive.
  3. Go to the DOS command prompt.  Then, type A:VINSTALL and press
     Enter.  The supported display list appears.
  4. Using the Arrow keys, highlight the display type which you
     use with your ThinkPad, and press Enter.
  5. Follow the instructions on the screen to save your display
     selection; then press F3 to exit the menu.
  6. Remove the diskette from the diskette drive; then restart the
     system.  The ThinkPad is now ready to work with Windows 95 beta
     video device driver.

  <Verifying Windows 95 device driver setup for ThinkPad 755C/Cs>
  1. After installing or set up Windows 95 on your ThinkPad; click
     "My Computer".
  2. Click "Control Panel"; Click "Display"; Click on "Setting" tab.
  3. Click "Change Display Type..." button.
  4. Make sure that Adapter Type is "Western Digital".
  5. Close "Change Display Type" windows; verify that "256 Color" can
     be selected in "Color palette".

2.1.3. ThinkPad Features Program
--------------------------------
   The ThinkPad Features Program for Windows works on Windows 95.  If
  you install Windows 95 over a DOS/Windows 3.x system on which you
  have already installed ThinkPad Features Program, it is migrated
  into "Start Menu" automatically.  Click "Start"; click "Programs";
  click "ThinkPad"; then click "ThinkPad Features" to start the
  program.

   If you install Windows 95 on a blank hard disk or you haven't
  installed ThinkPad Features Program, follow the instructions of
  "ThinkPad Features Program - Installing for Windows" in the
  ThinkPad User's Guide.

2.1.4. PCMCIA Device driver
---------------------------
   Windows 95 comes with the integrated PCMCIA support.  To use the
  Windows 95 PCMCIA support functions, refer to the Windows 95
  documentation or on-line help.

   If you want to use ThinkPad PC Card Director (or EasyPlaying),
  you still can use ThinkPad DOS PCMCIA device drivers.  To
  install ThinkPad PCMCIA device drivers, follow the instructions
  of "Installing the PCMCIA drivers - Installing for DOS" in
  the ThinkPad User's Guide.  However, it is recommended to use
  the Windows 95 version of PCMCIA support until ThinkPad Windows 95
  PCMCIA software becomes available.

  <Important!>---------------------------------------------------------
   The Windows 95 installation program doesn't enable its own 32bit
  PCMCIA support automatically.  If you already have a ThinkPad system
  with ThinkPad DOS/Windows PCMCIA software and install Windows 95 beta
  on the system, the Windows 95 installation program keeps the ThinkPad
  PCMCIA support software and you can keep using it. However, the
  Windows 95 plug and play functions of its own PCMCIA support cannot
  be used with ThinkPad PCMCIA support software.  For more detail about
  PCMCIA support software setup, refer to "Section 8.4. PCMCIA support
  software setup.
  ---------------------------------------------------------------------

2.1.5. Audio Support Software
-----------------------------
   The ThinkPad Audio Support Software for Windows works on Windows
  95.  If you install Windows 95 over a DOS/Windows 3.x system on
  which you have already installed ThinkPad Audio Support Software,
  it is migrated into "Start Menu" automatically.  Click "Start";
  click "Programs"; then click "Audio" to select the ThinkPad audio
  program which you use.

   If you install Windows 95 on a blank hard disk or you haven't
  installed ThinkPad Features Program, follow the instructions of
  "ThinkPad Features Program - Installing for Windows" in the
  ThinkPad User's Guide.

  <Important!>---------------------------------------------------------
   ThinkPad Audio Support Software setup makes several program icons to
  use ThinkPad audio functions.  The "Sound Recorder" icon, which works
  fine under Windows 3.1, is not set up correctly under Windows 95
  because the program name of Windows sound record utility is changed.
  To setup "Sound Recorder" icon;
  1. Verify that you have successfully installed or migrated ThinkPad
     Audio Support Software onto Windows.
     - Click "Start"; click "Programs"; then click "Audio"
     - "Audio Control", "Media Player", "Sound Recorder" and "Read Me"
       programs should be visible.  If not, you need to reinstall
       ThinkPad Audio Support Software.
  2. Click "Start"; click "Settings"; then click "Taskbar..."
  3. Click on "Start Menu Programs" tab.
  4. Click "Advanced..." button.
  5. Click "+" mark of "Programs" in the hierarchy window located left-
     hand side; then click "Audio".
  6. Highlight "Sound Recorder" in the content window located right-
     hand side; click "File" menu; then click "Properties".
  7. Click on "Shortcut" tab; and change "Target" program name from
     "SOUNDREC.EXE" to "C:\WINDOWS\SNDREC32.EXE". (C:\WINDOWS could
     be different depending on the subdirectory in which you installed
     Windows 95.)
  8. Click "OK"; now you can use "Sound Recorder" under Windows 95.
  ---------------------------------------------------------------------

2.2. Known limitations and problems with Windows 95 beta program
----------------------------------------------------------------

  o ThinkPad Audio driver limitations
    When ThinkPad Audio driver is loaded, the suspend function has the
    following limitations.
    - When you play audio and try to suspend during the audio playback,
      the system doesn't suspend.
    - When you try to suspend the system and fail to do so, you need to
      wait for five to fifteen seconds.  Then try to suspend the system
      again.  If you still cannot suspend the system, you may need to
      wait for another fifteen seconds or so to suspend the system
      successfully.

  o Power management limitations with PC cards
    When you inserted a PC card into PCMCIA slots of ThinkPad, the
    suspend function currently has the following limitations.
    - When the system is power by AC, ThinkPad doesn't enter full
      suspend and enters standby mode.
    - When the system is power by battery, ThinkPad always enter
      suspend mode regardless of the PC card status.  You may lose
      the connection if your PC card is a network card or modem.
    - Windows 95 PCMCIA support software does not support the ring
      indicator of PCMCIA modem cards.  Therefore, you cannot use
      ring indications by PCMCIA modems even if it's support by
      cards.

  o No Ring indicator supported by Windows 95 PCMCIA support
    Windows 95 PCMCIA support software does not support the ring
    indicator of PCMCIA modem cards.  Therefore, you cannot use
    ring indications by PCMCIA modems even if it's support by
    cards.

  o Token-Ring Credit Card Adapter problem
    When you use IBM Token-Ring 16/4 Credit Card Adapter II (Part
    Number 0933931) with Windows 95 PCMCIA support software, the
    card may not be enabled correctly.  Most 755C/Cs products don't
    have this problem.  IBM Token-Ring 16/4 Credit Card Adapter and
    IBM Token-Ring Auto 16/4 Credit Adapter III (Part Number 04H6922)
    don't have this problem.

  o Horizontal stripe appears with mouse pointer on external CRT
    When you attach a high resolution external CRT monitor and switch
    between a MS-DOS full screen session and Windows 95 desktop, you
    may observe a horizontal stripe with the mouse pointer.  If this
    happens, take the following steps.

    1. Click "My Computer"
    2. Click "Control Panel"
    3. Click "System"
    4. Click on "Performance" tab
    5. Click "Graphics..." button
    6. Move the slider of "Hardware acceleration" left one notch
    7. You will be prompted to restart the system

    Upon next system boot, the horizontal stripe should disappear.

  o Mwave DSP processor appears in Device Manager
    You may find "Mwave DSP processor" under "Other devices" in
    Device Manager while ThinkPad 755C/Cs don't have Mwave device.
    If you encounter this problem, go to "Unknown Hardware" problem
    below.

  o "Unknown Hardware" problem
    If you want to fix this problem, you first need to modify a Win95
    information file in a hidden directory.  If you are not familiar
    with Windows 95 beta or you are a non-experienced PC / Windows
    user, it's not recommended to do the following. Unexpected results
    may occur if you cannot follow the instructions correctly.

    1. Go to MS-DOS Prompt
    2. Type "CD INF" and press Enter to go to the subdirectory
       C:\WINDOWS\INF. (Note that C:\WINDOWS\INF is a hidden directory)
    3. Back up NODRIVER.INF.  Type "COPY NODRIVER.INF NODRIVER.BAK".
       These *.INF files are very important for Windows 95 Device
       Manager and you need to save the original one.
    4. Edit NODRIVER.INF.  Type "EDIT NODRIVER.INF" and press Enter.
    5. Search [Manufacturer] section; Find the following statement.

       %IBMMfg%=IBM

       If you can find it, go to the next step.  Otherwise, add this
       statement in [Manufacturer] section.
    6. Search [IBM] section; if you don't find it, add [IBM] section
       somewhere between [Manufacturer] and [NODRIVER] section; find
       the following statement.

       %*IBM0040.DeviceDesc%=NODRIVER,*IBM0040

       If you cannot find it, simply add this statement in [IBM]
       section.  Otherwise, go to the next step.
    7. Search [String] section; find 'IBMMfg="IBM"' statement; after
       this line, find the following statement.

       *IBM0040.DeviceDesc="xxxxxx"  (xxxxxx is some device name)

       If you find it, change it to as follows.

       *IBM0040.DeviceDesc="ThinkPad Audio Device"

    8. Save the modified NODRIVER.INF file.  And exit MS-DOS prompt.

    Next, you need to remove "Unknown Device" (or "Mwave DSP") from
    Device Manager.  Then need to refresh the hardware structure.

    9.  Click "My Computer"
    10. Click "Control Panel"
    11. Click "System"
    12. Click on "Device Manager" tab
    13. Click "+" mark of "Other devices"; you see "Unknown Device"
        (or "Mwave DSP processor").
    14. Click on "Unknown Device" (or "Mwave DSP") and click "Remove"
        button; click "OK" to confirm.
    15. Click "Refresh" button; Windows 95 will restructure the device
        tree in "Device Manager" and you now should see "ThinkPad Audio
        Device" under "Other detected devices".

  <Important!>---------------------------------------------------------
    If you encounter any unexpected results by doing the above, you
   might have failed to modify your NODRIVER.INF file correctly. You
   should recover your original NODRIVER.INF from NODRIVER.BAK which
   you've saved. Rename NODRIVER.BAK to NODRIVER.INF and do the above
   steps again, if desired.
  ---------------------------------------------------------------------

-----------------------------------------------------------------------
3. ThinkPad 360/355 Family and 370C systems
-------------------------------------------

3.1. Install and setup Windows 95 on ThinkPad
---------------------------------------------
3.1.0. Before you proceed
-------------------------
   Again, you are strongly recommended to get the latest system
  program service diskette and update your system BIOS.  Otherwise,
  the following information is not applicable on your system.

3.1.1. Video device drivers
---------------------------
   The video device driver for ThinkPad 360/355/370 systems is included
  in Windows 95 and it is automatically installed by Windows 95
  Setup program.  You don't need ThinkPad Windows video device driver
  any longer but still need to install ThinkPad VESA video driver.
  The following procedure enables Windows 95 video device driver
  functions.

  <Enabling Windows 95 Video device driver>
  1. Check your CONFIG.SYS file and look for the following statement.

     :
     DEVICE=C:\IBMVESA\VESA.EXE
     :
     (Note: The directory "C:\IBMVESA" could be different if you
      have installed ThinkPad DOS video device driver into a
      different subdirectory.)

     If you find the statement, your system is already set up for
     Windows 95 video device driver for ThinkPad.  If not, go to
     the next step.
  2. Have ThinkPad Video feature diskette.  (The latest version as
     of 6/1/95 is 1.33) and insert it into the diskette drive.
  3. Go to the DOS command prompt.  Then, type A:VINSTALL and press
     Enter.  The supported display list appears.
  4. Using the Arrow keys, highlight the display type which you
     use with your ThinkPad, and press Enter.
  5. Follow the instructions on the screen to save your display
     selection; then press F3 to exit the menu.
  6. Remove the diskette from the diskette drive; then restart the
     system.  The ThinkPad is now ready to work with Windows 95 beta
     video device driver.

  <Verifying Windows 95 device driver setup for ThinkPad 360/355/370>
  1. After installing or set up Windows 95 on your ThinkPad; click
     "My Computer".
  2. Click "Control Panel"; Click "Display"; Click on "Setting" tab.
  3. Click "Change Display Type..." button.
  4. Make sure that Adapter Type is "Western Digital".
  5. Close "Change Display Type" windows; verify that "256 Color" can
     be selected in "Color palette".

3.1.2. ThinkPad Features Program
--------------------------------
   The ThinkPad Features Program for Windows works on Windows 95.  If
  you install Windows 95 over a DOS/Windows 3.x system on which you
  have already installed ThinkPad Features Program, it is migrated
  into "Start Menu" automatically.  Click "Start"; click "Programs";
  click "ThinkPad"; then click "ThinkPad Features" to start the
  program.

   If you install Windows 95 on a blank hard disk or you haven't
  installed ThinkPad Features Program, follow the instructions of
  "ThinkPad Features Program - Installing for Windows" in the
  ThinkPad User's Guide.

3.1.3. PCMCIA Device driver
---------------------------
   Windows 95 comes with the integrated PCMCIA support.  To use the
  Windows 95 PCMCIA support functions, refer to the Windows 95
  documentation or on-line help.

   If you want to use ThinkPad PC Card Director (or EasyPlaying),
  you still can use ThinkPad DOS PCMCIA device drivers.  To
  install ThinkPad PCMCIA device drivers, follow the instructions
  of "Installing the PCMCIA drivers - Installing for DOS" in
  the ThinkPad User's Guide.  However, it is recommended to use
  the Windows 95 version of PCMCIA support until ThinkPad Windows 95
  PCMCIA software becomes available.

  <Important!>---------------------------------------------------------
   The Windows 95 installation program doesn't enable its own 32bit
  PCMCIA support automatically.  If you already have a ThinkPad system
  with ThinkPad DOS/Windows PCMCIA software and install Windows 95 beta
  on the system, the Windows 95 installation program keeps the ThinkPad
  PCMCIA support software and you can keep using it. However, the
  Windows 95 plug and play functions of its own PCMCIA support cannot
  be used with ThinkPad PCMCIA support software.  For more detail about
  PCMCIA support software setup, refer to "Section 8.4. PCMCIA support
  software setup.
  ---------------------------------------------------------------------

3.2. Known limitations and problems with Windows 95 beta program
----------------------------------------------------------------

  o Power management limitations with PC cards
    When you inserted a PC card into PCMCIA slots of ThinkPad, the
    suspend function currently has the following limitations.
    - When the system is power by AC, ThinkPad doesn't enter full
      suspend and enters standby mode.
    - When the system is power by battery, ThinkPad always enter
      suspend mode regardless of the PC card status.  You may lose
      the connection if your PC card is a network card or modem.

  o Horizontal stripe appears with mouse pointer on external CRT
    When you attach a high resolution external CRT monitor and switch
    between a MS-DOS full screen session and Windows 95 desktop, you
    may observe a horizontal stripe with the mouse pointer.  If this
    happens, take the following steps.

    1. Click "My Computer"
    2. Click "Control Panel"
    3. Click "System"
    4. Click on "Performance" tab
    5. Click "Graphics..." button
    6. Move the slider of "Hardware acceleration" left one notch
    7. You will be prompted to restart the system

    Upon next system boot, the horizontal stripe should disappear.

  o No Ring indicator supported by Windows 95 PCMCIA support
    Windows 95 PCMCIA support software does not support the ring
    indicator of PCMCIA modem cards.  Therefore, you cannot use
    ring indications by PCMCIA modems even if it's support by
    cards.

  o Token-Ring Credit Card Adapter problem
    When you use IBM Token-Ring 16/4 Credit Card Adapter II (Part
    Number 0933931) with Windows 95 PCMCIA support software, the
    card may not be enabled correctly.  Most ThinkPad 355/360 products
    don't have this problem.  ThinkPad 370C system doesn't have this
    problem.  IBM Token-Ring 16/4 Credit Card Adapter and IBM
    Token-Ring Auto 16/4 Credit Adapter III (Part Number 04H6922)
    don't have this problem.

-----------------------------------------------------------------------
4. ThinkPad 340CSE systems
--------------------------

4.1. Install and setup Windows 95 on ThinkPad
---------------------------------------------
4.1.0. Before you proceed
-------------------------
   Again, you are strongly recommended to get the latest system
  program service diskette and update your system BIOS.  Otherwise,
  the following information is not applicable on your system.

4.1.1. Video device drivers
---------------------------
   The video device driver for ThinkPad 340CSE systems is included
  in Windows 95 and it is automatically installed by Windows 95
  Setup program.  You don't need ThinkPad Windows video device driver
  any longer.
  <Verifying Windows 95 device driver setup for ThinkPad 340CSE>
  1. After installing or set up Windows 95 on your ThinkPad; click
     "My Computer".
  2. Click "Control Panel"; Click "Display"; Click on "Setting" tab.
  3. Click "Change Display Type..." button.
  4. Make sure that Adapter Type is "Cirrus Logic".

4.1.2. ThinkPad Features Program
--------------------------------
   The ThinkPad Features Program for Windows works on Windows 95.  If
  you install Windows 95 over a DOS/Windows 3.x system on which you
  have already installed ThinkPad Features Program, it is migrated
  into "Start Menu" automatically.  Click "Start"; click "Programs";
  click "ThinkPad"; then click "ThinkPad Features" to start the
  program.

   If you install Windows 95 on a blank hard disk or you haven't
  installed ThinkPad Features Program, follow the instructions of
  "ThinkPad Features Program - Installing for Windows" in the
  ThinkPad User's Guide.

4.1.3. PCMCIA Device driver
---------------------------
   Windows 95 comes with the integrated PCMCIA support.  To use the
  Windows 95 PCMCIA support functions, refer to the Windows 95
  documentation or on-line help.

   If you want to use ThinkPad PC Card Director (or EasyPlaying),
  you still can use ThinkPad DOS PCMCIA device drivers.  To
  install ThinkPad PCMCIA device drivers, follow the instructions
  of "Installing the PCMCIA drivers - Installing for DOS" in
  the ThinkPad User's Guide.  However, it is recommended to use
  the Windows 95 version of PCMCIA support until ThinkPad Windows 95
  PCMCIA software becomes available.

  <Important!>---------------------------------------------------------
   The Windows 95 installation program doesn't enable its own 32bit
  PCMCIA support automatically.  If you already have a ThinkPad system
  with ThinkPad DOS/Windows PCMCIA software and install Windows 95 beta
  on the system, the Windows 95 installation program keeps the ThinkPad
  PCMCIA support software and you can keep using it. However, the
  Windows 95 plug and play functions of its own PCMCIA support cannot
  be used with ThinkPad PCMCIA support software.  For more detail about
  PCMCIA support software setup, refer to "Section 8.4. PCMCIA support
  software setup.
  ---------------------------------------------------------------------

4.2. Known limitations and problems with Windows 95 beta program
----------------------------------------------------------------

  o Power management limitations with PC cards
    When you inserted a PC card into PCMCIA slots of ThinkPad, the
    suspend function currently has the following limitations.
    - When the system is power by AC, ThinkPad doesn't enter full
      suspend and enters standby mode.
    - When the system is power by battery, ThinkPad always enter
      suspend mode regardless of the PC card status.  You may lose
      the connection if your PC card is a network card or modem.

  o No Ring indicator supported by Windows 95 PCMCIA support
    Windows 95 PCMCIA support software does not support the ring
    indicator of PCMCIA modem cards.  Therefore, you cannot use
    ring indications by PCMCIA modems even if it's support by
    cards.

  o Windows 95 logo screen becomes brown
    Upon Windows 95 boot, its logo screen background becomes brown.
    This is normal and everything works fine after Windows 95 desktop
    screen appears.

-----------------------------------------------------------------------
5. ThinkPad 755CE/CSE/CX/CD/CDV systems
---------------------------------------

5.1. Install and setup Windows 95 on ThinkPad
---------------------------------------------

5.1.0. Before you proceed
-------------------------
   Again, you are strongly recommended to get the latest system
  program service diskette and update your system BIOS.  Otherwise,
  the following information is not applicable on your system.

5.1.1. During Windows 95 installation
-------------------------------------
   You may encounter "Unknown Hardware Found" messages when you install
  Windows 95 beta code. In these cases, select "Do not install a driver
  (Windows will not prompt you again)".  By doing this, you will see
  "Unknown Device"s under "Other devices" in Windows 95 Device Manager.
  If you want to see those device names in Device Manager, refer to
  "Unknown Hardware" problem in Section 5.2.

5.1.2. Video device drivers
---------------------------
   The video device driver for ThinkPad 755CE/CD/CX/CV systems is
  included in Windows 95 and it is automatically installed by Windows
  95 Setup program.

  <Verifying Windows95 device driver setup for ThinkPad 755CE/CD/CV>
  1. After installing or set up Windows 95 on your ThinkPad; click
     "My Computer".
  2. Click "Control Panel"; Click "Display"; Click on "Setting" tab.
  3. Click "Change Display Type..." button.
  4. Make sure that Adapter Type is "Western Digital".

  <Verifying Windows 95 device driver setup for ThinkPad 755CX>
  Windows 95 preview beta (M8) doesn't support ThinkPad 755CX 800x600
  LCD.  It supports only 640x480 resolution. If you have a later
  release of Windows 95, it may include 800x600 support.

  1. After installing or set up Windows 95 on your ThinkPad; click
     "My Computer".
  2. Click "Control Panel"; Click "Display"; Click on "Setting" tab.
  3. Click "Change Display Type..." button.
  4. Click "Change" button for "Adapter Type"
  5. If the list shows "IBM ThinkPad 755CX(WD)", your Windows 95 beta
     release supports 800x600.  Select it and click "OK".
  6. You will be prompted to restart the system.  After reboot, you can
     get 800x600 resolution.

5.1.3. ThinkPad Features Program
--------------------------------
   The ThinkPad Features Program for Windows works on Windows 95.  If
  you install Windows 95 over a DOS/Windows 3.x system on which you
  have already installed ThinkPad Features Program, it is migrated
  into "Start Menu" automatically.  Click "Start"; click "Programs";
  click "ThinkPad"; then click "ThinkPad Features" to start the
  program.

   If you install Windows 95 on a blank hard disk or you haven't
  installed ThinkPad Features Program, follow the instructions of
  "ThinkPad Features Program - Installing for Windows" in the
  ThinkPad User's Guide.

  <Important!>---------------------------------------------------------
   The "Display" device driver setting  of ThinkPad Features has a
  problem with Windows 95 beta.  Before changing any display setting
  by "Display" applet, refer to "Display device driver setting problem"
  in section 5.2.
  ---------------------------------------------------------------------

5.1.4. PCMCIA Device driver
---------------------------
   Windows 95 comes with the integrated PCMCIA support.  To use the
  Windows 95 PCMCIA support functions, refer to the Windows 95
  documentation or on-line help.

   If you want to use ThinkPad PC Card Director (or EasyPlaying),
  you still can use ThinkPad DOS PCMCIA device drivers.  To
  install ThinkPad PCMCIA device drivers, follow the instructions
  of "Installing the PCMCIA drivers - Installing for DOS" in
  the ThinkPad User's Guide.  However, it is recommended to use
  the Windows 95 version of PCMCIA support until ThinkPad Windows 95
  PCMCIA software becomes available.

  <Important!>---------------------------------------------------------
   The Windows 95 installation program doesn't enable its own 32bit
  PCMCIA support automatically.  If you already have a ThinkPad system
  with ThinkPad DOS/Windows PCMCIA software and install Windows 95 beta
  on the system, the Windows 95 installation program keeps the ThinkPad
  PCMCIA support software and you can keep using it. However, the
  Windows 95 plug and play functions of its own PCMCIA support cannot
  be used with ThinkPad PCMCIA support software.  For more detail about
  PCMCIA support software setup, refer to "Section 8.4. PCMCIA support
  software setup.
  ---------------------------------------------------------------------

5.1.5. CD-ROM Device driver (ThinkPad 755CD or other CD-ROM model only)
-----------------------------------------------------------------------

   Windows 95 comes with a generic ATAPI CD-ROM driver and it works
  with the ThinkPad integrated CD-ROM.  However, DOS/Windows version
  of IBM CD-ROM driver is not removed, if you upgrade to Windows 95 beta
  from DOS/Windows with IBM CD-ROM driver loaded.  The CD-ROM is still
  visible in this case but you lose speed and some functionality which
  Windows 95 generic ATAPI driver provides.  The generic Windows 95
  CD-ROM driver is automatically installed if you don't migrated from
  DOS/Windows or you migrated from DOS/Windows but without IBM CD-ROM
  driver.  To make sure that you are using Windows 95 generic ATAPI
  CD-ROM driver, do the following steps.

  1. Go to MS-DOS command prompt
  2. Edit CONFIG.SYS
  3. Look for IBMTPCD.SYS in CONFIG.SYS
     <example>
     DEVICE=C:\xxxxxx\IBMTPCD.SYS /D:TPCD001 /P:170 /R
     (Note xxxxxx is the name of subdirectory where you installed the
      CD-ROM driver)

     If you find it, add "REM" before this statement to comment it out;
     save CONFIG.SYS.
     If you cannot find it or it's already REM'd out, quit and go to
     the next step.
  4. Edit AUTOEXEC.BAT
  5. Look for MSCDEX.EXE in AUTOEXEC.BAT
     <example>
     C:\xxxxxx\MSCDEX.EXE /D:TPCD001 /M:15
     (Note xxxxxx is the name of subdirectory where you installed the
      CD-ROM driver)

     If you find it, add "REM" before this statement to comment it out;
     save AUTOEXEC.BAT.
     If you cannot find it or it's already REM'd out, quit and go to
     the next step.
  6. Exit DOS command prompt; Reboot the system.

5.1.6. Mwave support software
-----------------------------
   You need to have Mwave support software version 1.10 or later to get
  Mwave functions on Windows 95 beta.  If you are not sure what version
  of Mwave software you have, run "C:\MWW\MANAGER\MWLEVELS.EXE" (the
  location of MWLEVELS might be different, if you didn't install Mwave
  support software into the default directory) from Windows. This opens
  up a text window and you can find your Mwave software version at the
  bottom of windows as follows.

  OEM=Mwave ThinkPad Release 1.0

   If you already have Mwave version 1.10 software in your system with
  Windows and you plan to install Windows 95 over Windows system, Mwave
  software is automatically migrated to the Windows 95 environment.

   In case you already have Mwave version 1.10 software in your system
  with Windows but you plan to install Windows 95 into a different
  directory or drive, Mwave software is NOT migrated to the Windows 95
  system. This is by design of Windows 95.  You need to install Mwave
  support software again from Windows 95.

   If you plan to install Windows 95 beta on a blank harddisk, Windows
  95 doesn't need CONFIG.SYS and AUTOEXEC.BAT, thus those two files are
  missing on the root directory of the boot drive.  Mwave software
  requires both files on the root directory of the boot drive in order
  to be installed correctly.  After installing Windows 95 on your
  system, make CONFIG.SYS and AUTOEXEC.BAT on your system's boot drive.
  CONFIG.SYS can be a blank file.  AUTOEXEC.BAT must have a path
  statement, for example;

  REM This AUTOEXEC.BAT is required for Mwave support software
  PATH=C:\WINDOWS;C:\WINDOWS\COMMAND

  (Note: "C:\" should be the driver letter of paritition on which you
         have installed Windows 95 beta.)

  Now you can install Mwave support software version 1.10 onto Windows
  95 beta.

  You must have a patch for Mwave software to run under Windows 95
  correctly. This patch code can be obtained from IBM PC Company BBS or
  from CompuServe ThinkPad Forum library section.  Look for "Mwave fix
  for > 16M and Macromedia Director".  The installation instructions
  are available in README file in this patch package.

  <Important!>---------------------------------------------------------
  This patch code MUST be installed with Mwave support software version
  1.10.  And if you don't apply this patch, your Mwave support software
  doesn't run under Windows 95 correctly.
  ---------------------------------------------------------------------

5.1.7. Infrared Device Driver
-----------------------------
   You can use ThinkPad Infrared device driver on Windows 95.  If you
  have ThinkPad Infrared Device driver working on Windows and plan to
  migrate to Windows 95 beta, the Infrared device driver will be
  migrated to Windows 95 environment automatically.

   If you don't have ThinkPad Infrared device driver on your Windows
  system or you are going to install Windows 95 beta on a blank hard
  disk, you can install ThinkPad Infrared device driver after you
  install Windows 95 beta on your system.  Follow the instructions
  in "Installing the IR device driver - Installing for Windows" in
  the ThinkPad User's Guide.

  <Important!>---------------------------------------------------------
   If you encounter a problem when you disable the ThinkPad infrared
  port and reassign the IRQ for the disabled infrared port to one of
  the IRQs used by other device whose virtual device driver requires
  exclusive use of its IRQ, you need to get a patch code for the
  infrared virtual device driver.  Go to "Problem with disabling
  infrared port" in section 5.2.
  ---------------------------------------------------------------------

5.1.8. Enhanced Video Device Driver
-----------------------------------
   You can use ThinkPad Enhanced video device driver on Windows 95.  If
  you have the Enhanced video device driver working on Windows and plan
  to migrate to Windows 95 beta, the Enhanced video device driver will
  be migrated to Windows 95 environment automatically.

   If you don't have ThinkPad Enhanced video device driver on your
  Windows system or you are going to install Windows 95 beta on a blank
  hard disk, you can install ThinkPad Enhanced video device driver after
  you install Windows 95 beta on your system.  Follow the instructions
  in "Installing the Enhanced video device driver - Installing for
  Windows" in the ThinkPad User's Guide.

  <Important!>---------------------------------------------------------
   To enable the enhanced video functions, you need to change the
  device setting by "Display" applet of ThinkPad Features.  The
  "Display" device driver setting  of ThinkPad Features has a problem
  with Windows 95 beta.  Before changing any display setting by
  "Display" applet, refer to "Display device driver setting problem"
  in section 5.2.
  ---------------------------------------------------------------------

5.2. Known limitations and problems with Windows 95 beta program
----------------------------------------------------------------

  o Power management limitations with PC cards
    When you inserted a PC card into PCMCIA slots of ThinkPad, the
    suspend function currently has the following limitations.
    - When the system is power by AC, ThinkPad doesn't enter full
      suspend and enters standby mode.
    - When the system is power by battery, ThinkPad always enter
      suspend mode regardless of the PC card status.  You may lose
      the connection if your PC card is a network card or modem.

  o No Ring indicator supported by Windows 95 PCMCIA support
    Windows 95 PCMCIA support software does not support the ring
    indicator of PCMCIA modem cards.  Therefore, you cannot use
    ring indications by PCMCIA modems even if it's support by
    cards.

  o Horizontal stripe appears with mouse pointer on external CRT
    When you attach a high resolution external CRT monitor and switch
    between a MS-DOS full screen session and Windows 95 desktop, you
    may observe a horizontal stripe with the mouse pointer.  If this
    happens, take the following steps.

    1. Click "My Computer"
    2. Click "Control Panel"
    3. Click "System"
    4. Click on "Performance" tab
    5. Click "Graphics..." button
    6. Move the slider of "Hardware acceleration" left one notch
    7. You will be prompted to restart the system

    Upon next system boot, the horizontal stripe should disappear.

  o Timer suspend function with ThinkPad 755CD
    ThinkPad system supports the timer suspend function.  This is to
    get the system suspended if there is no system activity for a
    certain period.  Windows 95 generic CD-ROM driver accesses the
    CD-ROM devices every three seconds to detect CD-ROM insertion
    automatically.  This prevents ThinkPad 755CD from suspending
    even if there is no actual system activity for long time.  If you
    want to enable the timer suspend function;
     1. Click "My Computer"
     2. Click "Control Panel"
     3. Click "System"
     4. Click on "Device Manager" tab
     5. Click "+" mark on "CD-ROM"
     6. Double click "TEAC CD-40E"
     7. Click on "Setting" tab
     8. Remove a check mark on "Auto insert notification"

   o Mwave doesn't function when the ThinkPad has more than 16MB of
     memory.  This is a known Mwave driver problem and you can get the
     fix for this. The patch code can be obtained from IBM PC Company
     BBS or from CompuServe ThinkPad Forum library section.  Look for
     "Mwave fix for > 16M and Macromedia Director".  The installation
     instructions are available in README file in this patch package.

  o Problem with disabling Infrared port
    The problem typically occurs when you have reassigned the IRQ for
    the disabled infrared port to one of the IRQs used by Mwave or any
    other device whose virtual device driver requires exclusive use of
    its IRQ. If you have such a virtual device driver, it will fail to
    load during startup. This is not a problem if the IR port's IRQ is
    used by a device driver that can share the IRQ, including the
    standard COM port driver.

    To fix this problem, you need to get "ThinkPad Infrared driver
    patch to fix an IRQ problem" from IBM PC Company BBS or CompuServe
    ThinkPad Forum Library section.  The installation instructions
    are available in the package.

  o Suspend problem with Multimedia applications
    It is not recommended to suspend the ThinkPad when you are playing
    video clips, audio files, or MIDI files by Windows 95 Media Player
    or other Multimedia applications.  Your system may encounter some
    problem upon resume of the system.  Also it is not recommended to
    suspend the ThinkPad 755CD system when you are using Digital Video
    Producer, which is one of the preinstalled applications.

  o Video capture problem
    You may not be able to capture the video data for more than 15
    seconds under Windows 95 beta with Digital Video Producer, which
    is one of the preinstalled applications.

  o Display device driver setting problem
    When you want to change the display setting in Windows 3.x systems,
    you use the "Display" applet of ThinkPad Features.  Under Windows
    95, you can change the display setting by "Display" property sheet
    of Windows 95.  The current "Display" applet of ThinkPad Features
    requires ThinkPad video driver for Windows 3.x and has some problem
    with Windows 95.  You should not use "Display" applet unless you
    need to change the device driver setting for IBM ThinkPad Enhanced
    Video functions.  When you need to change the Enhanced video driver
    settings, take the following steps.

    1. Make necessary changes in "Display" applet of ThinkPad Features.
    2. Select "OK"; you will be prompted to select "Restart Windows" or
       "Continue"; select "Continue"; then select "OK" to exit
       "Display" applet.
    3. Click "Shut down" on "Start Menu" of Windows 95; select "Restart
       the computer?"; then click "Yes".
    4. When "Start Windows 95..." message appears on the top left
       corner of the screen, press F8; "Microsoft Windows 95 Startup
       Menu" appears; select "3.Safe Mode".
    5. When Windows 95 comes up, click "My Computer"; click "Control
       Panel"; click "Control Panel"; click "Display".
    6. Click on "Setting" tab; and make necessary changes of Display
       settings; click "OK"; you will be prompted to restart the
       computer; click "Yes".
    7. The system will reboot and the changes of display setting are
       taken effect.

  <Important!>---------------------------------------------------------
   When you enable "Enhance Video functions" of ThinkPad 755CD, you
  had better not use any high resolution modes with external CRT
  monitors.  If you do it, the resolution on ThinkPad internal LCD
  screen could be set to 800x600 or 1024x768 while it supports only
  up to 640x480.  As the result, you would be able to see only 640x480
  display area for the top left corner of 800x600, or 1024x768 area.
  ---------------------------------------------------------------------

  o 180 degree display rotation is not supported
    The 180 degree display rotation function of ThinkPad 755 CV Windows
    display driver is not supported by Windows 95 Western Digital video
    device driver.  You shouldn't select 180 degree rotation in the
    "Display" applet of ThinkPad Features program.

  o "Unknown Hardware" problem
    If you want to fix this problem, you first need to modify a Win95
    information file in a hidden directory.  If you are not familiar
    with Windows 95 beta or you are a non-experienced PC / Windows
    user, it's not recommended to do the following. Unexpected results
    may occur if you cannot follow the instructions correctly.  In
    addition, your Windows 95 beta code may have already included
    the correct device information of ThinkPad.  It depends on which
    revision of Windows 95 beta you are using.

    1. Go to MS-DOS Prompt
    2. Type "CD INF" and press Enter to go to the subdirectory
       C:\WINDOWS\INF. (Note that C:\WINDOWS\INF is a hidden directory)
    3. Back up NODRIVER.INF.  Type "COPY NODRIVER.INF NODRIVER.BAK".
       These *.INF files are very important for Windows 95 Device
       Manager and you need to save the original one.
    4. Edit NODRIVER.INF.  Type "EDIT NODRIVER.INF" and press Enter.
    5. Search [Manufacturer] section; Find the following statement.

       %IBMMfg%=IBM

       If you can find it, go to the next step.  Otherwise, add this
       statement in [Manufacturer] section.
    6. Search [IBM] section; if you don't find it, add [IBM] section
       somewhere between [Manufacturer] and [NODRIVER] section; find
       the following statement(s).

       %*IBMxxxx.DeviceDesc%=NODRIVER,*IBMxxxx
       (Note: xxxx of *IBMxxxx is a four digit number).

       Modify (or add) the statement(s) in this section as follows.
       (Note: IBM0050 and IBM36F1 is for ThinkPad 755 CD-ROM models
              only.)

       %*IBM0050.DeviceDesc%=NODRIVER,*IBM0050
       %*IBM36E0.DeviceDesc%=NODRIVER,*IBM36E0
       %*IBM36F1.DeviceDesc%=NODRIVER,*IBM36F1
       %*IBM36F2.DeviceDesc%=NODRIVER,*IBM36F2

    7. Search [String] section; find 'IBMMfg="IBM"' statement; after
       this line, find the following statement.

       *IBMxxxx.DeviceDesc="yyyyyy"  (xxxx   is a four digit number
                                      yyyyyy is a device name      )

       Modify (or add) the statement(s) in this section as follows.
       (Note: IBM0050 and IBM36F1 is for ThinkPad 755 CD-ROM models
              only.)

       *IBM0050.DeviceDesc="ThinkPad Enhanced Video Device"
       *IBM00E0.DeviceDesc="ThinkPad Mwave DSP"
       *IBM00F1.DeviceDesc="Mwave MPU-401 MIDI Port"
       *IBM00F2.DeviceDesc="Mwave Sound Blaster Support Device"

    8. Save the modified NODRIVER.INF file.  And exit MS-DOS prompt.

    Next, you need to remove "Unknown Device" (or "Mwave DSP") from
    Device Manager.  Then need to refresh the hardware structure.

    9.  Click "My Computer"
    10. Click "Control Panel"
    11. Click "System"
    12. Click on "Device Manager" tab
    13. Click "+" mark of "Other devices"; you see "Unknown Device"
        (or "Mwave DSP processor").
    14. Click on "Unknown Device" (or "Mwave DSP") and click "Remove"
        button; click "OK" to confirm.
    15. Click "Refresh" button; Windows 95 will restructure the device
        tree in "Device Manager" and you now should see correct device
        names under "Other detected devices".

  <Important!>---------------------------------------------------------
    If you encounter any unexpected results by doing the above, you
   might have failed to modify your NODRIVER.INF file correctly. You
   should recover your original NODRIVER.INF from NODRIVER.BAK which
   you've saved. Rename NODRIVER.BAK to NODRIVER.INF and do the above
   steps again, if desired.
  ---------------------------------------------------------------------

  o FaxWorks Voice problems
    FaxWorks Voice, which is one of the preinstalled applications, has
    the following problems under Windows 95 beta.
    - Telephone Icon is not displayed properly
      The FaxWorks telephone icon is not displayed properly as it is
      in Windows 3.x.  When you start one of FaxWorks Voice functions
      such as Call Center, the telephone icon is displayed over the
      program name of title bar.  Once you minimize Call Center, the
      telephone icon disappears from the title bar but some garbage
      might remain on the Windows 95 desktop screen.  This cosmetic
      problem doesn't affect the actual functions of FaxWorks Voice.
    - When you close the windows of FaxWorks Voice fax viewing, the
      system may encounter a problem and you might have to reboot
      the system.
    - If you have any problem related to sending/receiving fax by
      FaxWorks Voice, check the following.
      1. Click "My Computer"; click "Printers"; double click "FaxWorks
         Printer Driver (FX-WORKS)".
      2. Click on "Details" tab; verify that MWV is selected in "Print
         to the following port".  Windows 95 beta might show "MWV
         (Unknown local port)" but it is normal.

  o Tranxit infrared file transfer application problem
    Tranxit, which is one of the preinstalled applications, has the
    following problem under Windows 95 beta.
    - The high speed mode of IBM ThinkPad Infrared connection cannot
      be used when you connect two ThinkPad systems and Windows 95
      95 beta is installed on both of them.  The fixed and variable
      speed modes can be used.  To change the transfer mode;
      1. Select "Connection" on Tranxit menu bar; select "Setup..."
      2. Verify that "Infrared" is selected in "Connection Type"; click
         "Change Connection settings..."
      3. Select "Fixed" or "Variable" in "Infrared device mode".

-----------------------------------------------------------------------
6. ThinkPad 701C system
-----------------------
6.1. Install and setup Windows 95 on ThinkPad
---------------------------------------------

6.1.0. Before you proceed
-------------------------
   Again, you are strongly recommended to get the latest system
  program service diskette and update your system BIOS.  Otherwise,
  the following information is not applicable on your system.

   The Windows 95 device drivers for ThinkPad 701C are included in
  Windows 95.  When you install Windows 95 preview program beta (M8)
  on ThinkPad 701C, the device drivers are installed automatically
  except for infrared and ThinkPad 701C integrated modem.  If you have
  later build of Windows 95 beta, it might recognize the ThinkPad
  infrared device and integrated modem.

6.1.1. Infrared device driver
-----------------------------
   If the ThinkPad Infrared port is not listed in Device Manager,
  follow the next steps.

  1. Open Device Manager.
  2. Highlight the Communication Port which Infrared port is assigned.
  3. Click "Remove"; click "OK" to close "Device Manager".
  4. Click "Shut down" on "Start Menu" of Windows 95; select "Restart
     the computer?"; then click "Yes".
  5. During the next Windows 95 boot, you will be prompted to install
     a device driver for the communication port which is assigned for
     the infrared port in "New Hardware Found" window.  Click "Select
     from a list of alternate drivers; click "OK"; click "Show all
     devices"; select "Hewlett Packard" from Manufacturers; select
     "HP Infra-Red Communication Port"; then click "OK".

6.1.2. PCMCIA Device driver
---------------------------
   Windows 95 comes with the integrated PCMCIA support.  To use the
  Windows 95 PCMCIA support functions, refer to the Windows 95
  documentation or on-line help.

   If you want to use ThinkPad PC Card Director (or EasyPlaying),
  you still can use ThinkPad DOS PCMCIA device drivers.  To
  install ThinkPad PCMCIA device drivers, follow the instructions
  of "Installing the PCMCIA drivers - Installing for DOS" in
  the ThinkPad User's Guide.  However, it is recommended to use
  the Windows 95 version of PCMCIA support until ThinkPad Windows 95
  PCMCIA software becomes available.

  <Important!>---------------------------------------------------------
   The Windows 95 installation program doesn't enable its own 32bit
  PCMCIA support automatically.  If you already have a ThinkPad system
  with ThinkPad DOS/Windows PCMCIA software and install Windows 95 beta
  on the system, the Windows 95 installation program keeps the ThinkPad
  PCMCIA support software and you can keep using it. However, the
  Windows 95 plug and play functions of its own PCMCIA support cannot
  be used with ThinkPad PCMCIA support software.  For more detail about
  PCMCIA support software setup, refer to "Section 8.4. PCMCIA support
  software setup.
  ---------------------------------------------------------------------

6.1.3. Modem settings
---------------------

   If the ThinkPad integrated modem is not listed in Device Manager,
  follow the next steps.
  1. Open "Control Panel"
  2. Click "Add New Hardware"
  3. Click "Next"; Select "No" for "Do you want to Windows to search
     for your new hardware?"; then click "Next"
  4. Highlight "Modem" in "Hardware types" list box; click "Next"
  5. Click "Next" to let Windows 95 detect a modem.  If Windows 95 beta
     cannot detect your modem, repeat the step 1 to 4, then go to the
     next step.  Otherwise your modem setting is automatically done by
     Windows 95.
  6. If Windows 95 didn't detect your modem, check "Don't detect my
     modem" in "Install New Modem" dialog box; then click "Next"
  7. Select "Standard 14400 bps Modem"; the click "Next"
  8. Assign COM port for the modem according to your hardware
     configuration

6.2. Known limitations and problems with Windows 95 beta program
----------------------------------------------------------------

  o Docking problems with Windows 95 beta
    If you have a Windows 95 beta later than the preview program
    version, you might encounter the following docking problems.
    Microsoft and IBM are working on those problems.  You will not
    see those problems with Windows 95 preview version.
    - If you undock the Thinkpad 701C and redock it, Windows 95
      may locks up.
    - If you dock the ThinkPad 701C and undock it, the external
      floppy drive of 701C may become disabled.
    - If you dock the ThinkPad 701C, the auto suspend timer doesn't
      work due to a Adapter SCSI driver problem in Windows 95 beta.

-----------------------------------------------------------------------
7. ThinkPad 530CS system (Available only in Japan)
--------------------------------------------------

7.1. Install and setup Windows 95 on ThinkPad
---------------------------------------------

   The installation and setup procedure of Windows 95 on ThinkPad 530Cs
  is very similar to ThinkPad 755CE.  This section often refers to
  the information in "Section 5. ThinkPad 755CE/CD/CX/CV systems".

7.1.1. During Windows 95 installation
-------------------------------------
   You may encounter "Unknown Hardware Found" messages when you install
  Windows 95 beta code. In these cases, select "Do not install a driver
  (Windows will not prompt you again)".  By doing this, you will see
  "Unknown Device"s under "Other devices" in Windows 95 Device Manager.
  If you want to see those device names in Device Manager, refer to
  "Unknown Hardware" problem in Section 5.2.

  <Important!>---------------------------------------------------------
   During the Windows 95 installation, you are asked if you want to
  make a startup diskette for emergency use.  It is strongly
  recommended to attach the external floppy disk drive to ThinkPad
  530CS when you install Windows 95 beta.  Without the floppy drive,
  you might experience an inactive period for about two minutes during
  Windows 95 installation.  This is not a system hang.  However, you
  need to attach the external floppy drive to avoid this symptom.
  ---------------------------------------------------------------------

7.1.2. Video device drivers
---------------------------
   The video device driver for ThinkPad 530CS systems is included
  in Windows 95 and it is automatically installed by Windows 95
  Setup program.  You don't need ThinkPad Windows video device driver
  any longer.
  <Verifying Windows 95 device driver setup for ThinkPad 530CS>
  1. After installing or set up Windows 95 on your ThinkPad; click
     "My Computer".
  2. Click "Control Panel"; Click "Display"; Click on "Setting" tab.
  3. Click "Change Display Type..." button.
  4. Make sure that Adapter Type is "Cirrus Logic".

7.1.3. ThinkPad Features Program
--------------------------------
    For ThinkPad Features Program setup on ThinkPad 530CS with Windows
   95 Beta, refer to "Section 5.1.3. ThinkPad Features Program".

7.1.4. PCMCIA Device driver
---------------------------
    For PCMCIA device driver setup on ThinkPad 530CS with Windows
   95 Beta, refer to "Section 5.1.4. PCMCIA Device driver".

7.1.5. Mwave support software
-----------------------------
    For Mwave support software setup on ThinkPad 530CS with Windows
   95 Beta, refer to "Section 5.1.6. Mwave support software".

7.1.6. Infrared Device Driver
-----------------------------
    For Infrared device driver setup on ThinkPad 530CS with Windows
   95 Beta, refer to "Section 5.1.7. Infrared Device driver".

7.2. Known limitations and problems with Windows 95 beta program
----------------------------------------------------------------

  o Power management limitations with PC cards
    When you inserted a PC card into PCMCIA slots of ThinkPad, the
    suspend function currently has the following limitations.
    - When the system is power by AC, ThinkPad doesn't enter full
      suspend and enters standby mode.
    - When the system is power by battery, ThinkPad always enter
      suspend mode regardless of the PC card status.  You may lose
      the connection if your PC card is a network card or modem.

  o No Ring indicator supported by Windows 95 PCMCIA support
    Windows 95 PCMCIA support software does not support the ring
    indicator of PCMCIA modem cards.  Therefore, you cannot use
    ring indications by PCMCIA modems even if it's support by
    cards.

  o Windows 95 logo screen becomes brown
    Upon Windows 95 boot, its logo screen background becomes brown.
    This is normal and everything works fine after Windows 95 desktop
    screen appears.

   o Mwave doesn't function when the ThinkPad has more than 16MB of
     memory This is a known Mwave driver problem and you can get the
     fix for this. The patch code can be obtained from IBM PC Company
     BBS or from CompuServe ThinkPad Forum library section.  Look for
     "Mwave fix for > 16M and Macromedia Director".  The installation
     instructions are available in README file in this patch package.

  o Problem with disabling Infrared port
    The problem typically occurs when you have reassigned the IRQ for
    the disabled infrared port to one of the IRQs used by Mwave or any
    other device whose virtual device driver requires exclusive use of
    its IRQ. If you have such a virtual device driver, it will fail to
    load during startup. This is not a problem if the IR port's IRQ is
    used by a device driver that can share the IRQ, including the
    standard COM port driver.

    To fix this problem, you need to get "ThinkPad Infrared driver
    patch to fix an IRQ problem" from IBM PC Company BBS or CompuServe
    ThinkPad Forum Library section.  The installation instructions
    are available in the package.

  o Suspend problem with Multimedia applications
    It is not recommended to suspend the ThinkPad when you are playing
    video clips, audio files, or MIDI files by Windows 95 Media Player
    or other Multimedia applications.  Your system may encounter some
    problems upon system resume.

  o Intermittent hibernation fail
    ThinkPad 530Cs may not enter the hibernation mode with Windows 95
    once in a while.

  o Windows 95 Taskbar may disappear when CRT is attached
    Windows 95 Taskbar may disappear when you attach an external CRT
    monitor to ThinkPad 530Cs and suspend the system.

  o "Unknown Hardware" problem
    If you want to fix this problem, you first need to modify a Win95
    information file in a hidden directory.  If you are not familiar
    with Windows 95 beta or you are a non-experienced PC / Windows
    user, it's not recommended to do the following. Unexpected results
    may occur if you cannot follow the instructions correctly.  In
    addition, your Windows 95 beta code may have already included
    the correct device information of ThinkPad.  It depends on which
    revision of Windows 95 beta you are using.

    1. Go to MS-DOS Prompt
    2. Type "CD INF" and press Enter to go to the subdirectory
       C:\WINDOWS\INF. (Note that C:\WINDOWS\INF is a hidden directory)
    3. Back up NODRIVER.INF.  Type "COPY NODRIVER.INF NODRIVER.BAK".
       These *.INF files are very important for Windows 95 Device
       Manager and you need to save the original one.
    4. Edit NODRIVER.INF.  Type "EDIT NODRIVER.INF" and press Enter.
    5. Search [Manufacturer] section; Find the following statement.

       %IBMMfg%=IBM

       If you can find it, go to the next step.  Otherwise, add this
       statement in [Manufacturer] section.
    6. Search [IBM] section; if you don't find it, add [IBM] section
       somewhere between [Manufacturer] and [NODRIVER] section; find
       the following statement(s).

       %*IBMxxxx.DeviceDesc%=NODRIVER,*IBMxxxx
       (Note: xxxx of *IBMxxxx is a four digit number).

       Modify (or add) the statement(s) in this section as follows.

       %*IBM36E0.DeviceDesc%=NODRIVER,*IBM36E0
       %*IBM36F2.DeviceDesc%=NODRIVER,*IBM36F2

    7. Search [String] section; find 'IBMMfg="IBM"' statement; after
       this line, find the following statement.

       *IBMxxxx.DeviceDesc="yyyyyy"  (xxxx   is a four digit number
                                      yyyyyy is a device name      )

       Modify (or add) the statement(s) in this section as follows.
       (Note: IBM0050 and IBM36F1 is for ThinkPad 755 CD-ROM models
              only.)

       *IBM00E0.DeviceDesc="ThinkPad Mwave DSP"
       *IBM00F2.DeviceDesc="Mwave Sound Blaster Support Device"

    8. Save the modified NODRIVER.INF file.  And exit MS-DOS prompt.

    Next, you need to remove "Unknown Device" (or "Mwave DSP") from
    Device Manager.  Then need to refresh the hardware structure.

    9.  Click "My Computer"
    10. Click "Control Panel"
    11. Click "System"
    12. Click on "Device Manager" tab
    13. Click "+" mark of "Other devices"; you see "Unknown Device"
        (or "Mwave DSP processor").
    14. Click on "Unknown Device" (or "Mwave DSP") and click "Remove"
        button; click "OK" to confirm.
    15. Click "Refresh" button; Windows 95 will restructure the device
        tree in "Device Manager" and you now should see correct device
        names under "Other detected devices".

  <Important!>---------------------------------------------------------
    If you encounter any unexpected results by doing the above, you
   might have failed to modify your NODRIVER.INF file correctly. You
   should recover your original NODRIVER.INF from NODRIVER.BAK which
   you've saved. Rename NODRIVER.BAK to NODRIVER.INF and do the above
   steps again, if you desired.
  ---------------------------------------------------------------------

  o FaxWorks Voice problems
    FaxWorks Voice, which is one of the preinstalled applications, has
    the following problems under Windows 95 beta.
    - Telephone Icon is not displayed properly
      The FaxWorks telephone icon is not displayed properly as it is
      in Windows 3.x.  When you start one of FaxWorks Voice functions
      such as Call Center, the telephone icon is displayed over the
      program name of title bar.  Once you minimize Call Center, the
      telephone icon disappears from the title bar but some garbage
      might remain on the Windows 95 desktop screen.  This cosmetic
      problem doesn't affect the actual functions of FaxWorks Voice.
    - When you close the windows of FaxWorks Voice fax viewing, the
      system may encounter a problem and you might have to reboot
      the system.
    - If you have any problem related to sending/receiving fax by
      FaxWorks Voice, check the following.
      1. Click "My Computer"; click "Printers"; double click "FaxWorks
         Printer Driver (FX-WORKS)".
      2. Click on "Details" tab; verify that MWV is selected in "Print
         to the following port".  Windows 95 beta might show "MWV
         (Unknown local port)" but it is normal.

  o Tranxit infrared file transfer application problem
    Tranxit, which is one of the preinstalled applications, has the
    following problem under Windows 95 beta.
    - The high speed mode of IBM ThinkPad Infrared connection cannot
      be used when you connect two ThinkPad systems and Windows 95
      95 beta is installed on both of them.  The fixed and variable
      speed modes can be used.  To change the transfer mode;
      1. Select "Connection" on Tranxit menu bar; select "Setup..."
      2. Verify that "Infrared" is selected in "Connection Type"; click
         "Change Connection settings..."
      3. Select "Fixed" or "Variable" in "Infrared device mode".

-----------------------------------------------------------------------
8. System independent information
---------------------------------
8.1. Suspend command on Start menu
----------------------------------
   The "Suspend" command should be visible in the "Start" menu above
  "Shut Down" command.  If Windows 95 beta that you have doesn't enable
  this "Suspend" command, please take the following steps to correct
  the problem.

  <Enable APM functions>
  1. Click "My Computer"
  2. Click "Control Panel"
  3. Click "System"
  4. Click on "Device Manager" tab
  5. Select "System Devices", "Advanced Power Management", "Settings"
  6. Verify that "Enable Power management support" is selected
  7. Click "OK"
  <Make suspend command visible>
  1. Click "My Computer"
  2. Click "Control Panel"
  3. Click "Power"
  4. Select either "Always" or "Only when undocked" (depending on a
     type of ThinkPad you have) in "Show Suspend command on Start
     menu" box.

8.2. System Compatibility Test in Windows 95 DDK beta
-----------------------------------------------------
   IBM is closely working with Microsoft to get selected models of
  ThinkPad passed the Windows 95 System Compatibility Test (SCT).
  The SCT in Windows 95 M8 DDK is not a final test kit and has
  some problems with ThinkPad systems.  The Windows 95 SCT Kit
  version 4.0 may have some problems with ThinkPad in the following
  parts of SCT.

  - PnP BIOS Test
  - WkeyLook Test (To pass this test, you need to have an external
    keyboard)

8.3. PCMCIA Adapter Card Compatibility
--------------------------------------
  o PCMCIA network adpaters in Dock II
    You may not be able to enable or get your PCMCIA network adapter
    correctly when the card is inserted into the PCMCIA slot of IBM
    Dock II docking station.  If your card is working fine in the
    ThinkPad internal PCMCIA slots, you need to contact IBM PC Company
    HelpCenter and request a patch file.

  o Copying large files over IBM Token-Ring Auto 16/4 Credit Adapter
    You may not be able to copy large files between local and network
    drives when you use IBM Token-Ring Auto 16/4 Credit Card adapter
    for your network connection.

8.4. PCMCIA support software setup
----------------------------------

   The Windows 95 installation program doesn't enable its own 32bit
  PCMCIA support software.

   If you have a ThinkPad on which the ThinkPad DOS/Windows PCMCIA
  support software is already installed and want to use it after
  you install Windows 95 beta on the ThinkPad, you don't have to
  perform any specific setup.  The Windows 95 installation program
  automatically migrates the installed ThinkPad PCMCIA support
  software over to Windows 95 environment.

   If you have a ThinkPad on which the ThinkPad DOS/Windows PCMCIA
  support software is already installed but want to use Windows 95
  PCMCIA support software after you install Windows 95 on the
  ThinkPad, follow the next steps.

  1. Click "My Computer"
  2. Click "Control Panel"
  3. Click "PC Card"
  4. Select "No" for the question "Are you using a PC card to
     install Windows?"; then click "Next"
  5. Select "Yes" for the question "Would you like to review the
     change to your system files before Windows disable these
     drivers?"; then click "Next"
  6. Verify that the following statements are highlighted to be
     removed from your CONFIG.SYS.

     DEVICE=C:\THINKPAD\IBMDSS01.SYS
     DEVICE=C:\THINKPAD\IBMDOSCS.SYS
     DEVICE=C:\THINKPAD\DICRMU01.SYS
     DEVICE=C:\THINKPAD\$ICPMDOS.SYS
     DEVICE=C:\THINKPAD\AUTODRV.SYS C:\THINKPAD\AUTODRV.INI
     DEVICE=C:\THINKPAD\SRAMDRV2.SYS

     Click "Next"; Windows 95 also lets you review AUTOEXEC.BAT
     and SYSTEM.INI.  There are no ThinkPad PCMCIA support software
     setup included in AUTOEXEC.BAT and SYSTEM.INI.
  7. After you review all the system files, click "Finish" to
     complete the Windows 95 PCMCIA support setup.

   If you want to use the ThinkPad PCMCIA support software after you
  enabled the Windows 95 PCMCIA support software, you MUST disable
  Windows 95 PCMCIA support again.  Windows 95 disables its own PCMCIA
  support as default.  To make sure this;

  1. Click "My Computer"
  2. Click "Control Panel"
  3. Click "System"
  4. Click on "Device Manager" tab
  5. Click "+" mark on "PCMCIA socket"
  6. Verify that "PCIC or compatible PCMCIA controller" is disabled.
     (Red "X" sign should be visible on the PCIC icon, and "Device
     Status" is "This device is disabled" when you double click
     the PCIC icon.)  If the PCMCIA controller is already enabled
     ("Device Status" is "This device is working properly".),
     highlight "PCIC or compatible PCMCIA controller" by clicking
     the PCIC icon; click "Remove" button; then follow the instructions
     to disable Windows 95 PCMCIA support.

8.5. ThinkPad Docking control utility
-------------------------------------
   If you have installed Windows 95 beta over a ThinkPad on which the
  Docking control utility program for Windows is already installed,
  don't use the utility.  The Docking control utility provides several
  docking functions under Windows but is not necessary under Windows
  95 beta any longer.  All the docking capability by this utility is
  now provided by ThinkPad Plug-and-Play BIOS and Windows 95 Plug-and-
  Play support.  You don't have to install or use any specific programs
  to enable ThinkPad docking functions under Windows 95 beta.  It is
  recommended to remove the following statements from Windows INI files.

  o WIN.INI file
  [windows]
  :
  load=C:\THINKPAD\DOCKWIN.EXE  <-remove this statement
  :

  o SYSTEM.INI file
  :
  [386Enh]
  :
  device=IBMPNP.386             <-remove this statement
  :

8.6. ThinkPad Dock II docking station
-------------------------------------
    ThinkPad Dock II docking station supports docking and undocking
   operations without system power off.  You can dock and undock the
   system when it is suspended (warm docking), or you can dock and
   undock the system when it is powered on (hot docking).  This feature
   is available for ThinkPad 755 and 360 systems.  When you use hot /
   warm docking, you must disable the host adapter SCSI BIOS of Dock
   II docking station.  You can disable the host adapter SCSI BIOS
   by the Dock II SCSISelect utility.  Press Ctrl+A when prompted at
   boot time.  Then select "Configure/View Host Adapter Settings" and
   disable the Host Adapter BIOS.  You can also disable the host
   adapter BIOS by dip switches.  For further information, refer to
   "Chapter 5. Using the SCSI Controller" of Dock II User's Guide.

-----------------------------------------------------------------------
9. Other ThinkPad Systems
-------------------------

9.1. ThinkPad 750 systems
-------------------------
9.1.1 Install and setup Windows 95 on ThinkPad
----------------------------------------------
   IBM is testing the ThinkPad 750 systems with Windows 95 but only
  APM BIOS 1.0 is supported.  No PnP BIOS support is available on
  those systems.

9.1.0.0. Before you proceed
---------------------------
   Again, you are strongly recommended to get the latest system
  program service diskette and update your system BIOS.  Otherwise,
  the following information is not applicable on your system.

9.1.1.1. Video device drivers
-----------------------------
   To set up or install the video device driver on ThinkPad 750
  systems, refer to "Section 2.1.2. Video device driver - ThinkPad
  755C/Cs".

9.1.1.2. ThinkPad Features
--------------------------
   To set up or install the ThinkPad Features on ThinkPad 750
  systems, refer to "Section 2.1.3. ThinkPad Features - ThinkPad
  755C/Cs".

9.1.1.3. PCMCIA device drivers
-----------------------------
   To set up or install the PCMCIA device driver on ThinkPad 750
  systems, refer to "Section 2.1.4. PCMCIA device driver - ThinkPad
  755C/Cs".

9.1.1.4. Audio support software
-------------------------------
   To set up or install the audio support software on ThinkPad 750
  systems, refer to "Section 2.1.5. Audio Support software - ThinkPad
  755C/Cs".

9.1.2. Known limitations and problems with Windows 95 beta program
------------------------------------------------------------------

   For limitations and problems with ThinkPad 750 systems on Windows
  95 beta, refer to "Section 2.2 - ThinkPad 755C/Cs".

9.2. ThinkPad 340 system
------------------------
9.2.1 Install and setup Windows 95 on ThinkPad
----------------------------------------------
   IBM is testing the ThinkPad 340 system with Windows 95 but only
  APM BIOS 1.0 is supported.  No PnP BIOS support is available on
  those systems.

9.2.1.1. Video device drivers
-----------------------------
   There's no special video device driver is available for ThinkPad
  340.  You can use the standard VGA display driver available in
  Windows 95.

9.2.1.2. ThinkPad Features Program
----------------------------------
   To set up or install the ThinkPad Features on ThinkPad 340
  systems, refer to "Section 4.1.2. ThinkPad Features - ThinkPad
  340".

9.2.1.3. PCMCIA Device driver
-----------------------------
   To set up or install the PCMCIA device driver on ThinkPad 340
  systems, refer to "Section 4.1.3. PCMCIA device driver - ThinkPad
  340".

9.2.2. Known limitations and problems with Windows 95 beta program
------------------------------------------------------------------

   For limitations and problems with ThinkPad 340 system on Windows
  95 beta, refer to "Section 4.2 - ThinkPad 340".  Note that the video
  display related problems are not applicable.

9.3. ThinkPad 230Cs system (Available only in Japan)
----------------------------------------------------
9.3.1. Install and setup Windows 95 on ThinkPad
-----------------------------------------------
   IBM is testing the ThinkPad 230Cs system with Windows 95 but only
  APM BIOS 1.0 is supported.  No PnP BIOS support is available on
  those systems.

9.3.1.1. Video device drivers
-----------------------------
   The video device driver for ThinkPad 230Cs systems is included
  in Windows 95 and it is automatically installed by Windows 95
  Setup program.  You don't need ThinkPad Windows video device driver
  any longer.
  <Verifying Windows 95 device driver setup for ThinkPad 530CS>
  1. After installing or set up Windows 95 on your ThinkPad; click
     "My Computer".
  2. Click "Control Panel"; Click "Display"; Click on "Setting" tab.
  3. Click "Change Display Type..." button.
  4. Make sure that Adapter Type is "Cirrus Logic".

9.3.1.2. ThinkPad Features
--------------------------
   To set up or install the ThinkPad Features on ThinkPad 230Cs
  system, refer to "Section 2.1.3. ThinkPad Features - ThinkPad
  755C/Cs".

9.3.1.3. PCMCIA device drivers
-----------------------------
   To set up or install the PCMCIA device driver on ThinkPad 230Cs
  systems, refer to "Section 2.1.4. PCMCIA device driver - ThinkPad
  755C/Cs".

9.3.2. Known limitations and problems with Windows 95 beta program
------------------------------------------------------------------

   o Audio support software causes system hang
     The audio support software of ThinkPad 230Cs currently has a
    problem with Windows 95 beta and is not compatible.  You need
    to remove ThinkPad 230Cs audio device driver before you install
    the Windows 95 beta.
    1. Edit SYSTEM.INI.
    2. Find WAVEDEC.DRV in [drivers] section.
    3. Comment out "DEVICE=WAVEDEC.DRV".
     IBM is currently working to fix this problem and the updated
    driver will be distributed via several network services in
    Japan when the new driver becomes available.

9.4. Other ThinkPad systems
---------------------------
      IBM is not testing any other ThinkPad systems with Windows 95.
     Windows 95 may run on those legacy ThinkPad systems but IBM
     has not tested and will not test Windows 95 on those systems.

<End of Document>------------------------------------------------------