Re: 3com combo card: (Re: Some questions...)

["Shinichi Sakata" <ssakata@econ.lsa.umich.edu>]

Victor,

I am not really sure if I am using the latest warp driver. But it
re-initializes 3c589 card every time my thinkpad is awakened from
hybernation. The problem is that this re-initialization does not reset
the tranceiver mode. According to the log, which you can check with
3net_log command, the tranceiver mode is selected only when the driver
is loaded. So, the driver only talks with the tranceiver that is
active when the machine is booted. Does the driver on your machine
behave differently? 

  Shinichi


>>>>> "Victor" == Victor Kress <kress@ctpsun.ciw.edu> writes:

    Victor> This won't help the win95 folks, but with the latest
    Victor> drivers under warp, the 3com 3c589 card re-initializes
    Victor> when coming out of hybernate, or when hot plugged.  This
    Victor> should take care of it.

    Victor> ---------------------------- Victor Kress Geophysical
    Victor> Laboratory 5251 Broad Branch Road N.W.  Washington,
    Victor> D.C. 20015-1305 (202) 686-2410 x2489 web page:
    Victor> http://granite.ciw.edu/~kress ---------------------------

-- 
=============================================================================
   Shinichi Sakata, Ph.D.
   The University of Michigan       Internet: ssakata@umich.edu
   Department of Economics          Phone: (313) 764-2368 / 2355
   240 Lorch Hall, 1220             Fax:   (313) 764-2769
   611 Tappan Street
   Ann Arbor, MI 48109-1220 
=============================================================================