OS/2 MWave 2.0 & Vmodem

[Wilson Yip <wyip@nicotra.com.sg> (Wilson Yip)]

I hope somebody who is using OS/2 Warp, MWave 2.0 modem and
Vmodem can help me with this problem.

I was previously using a 750C with a Megahertz modem at Com 2 and
Vmodem at Com 4. Now that I have switched over to a 755CE using
the MWave 2.0 modem, my comms program TE/2 wont load after
loading Vmodem but gives the message:

"Cannot open ComPort 4"

Since Vmodem loads fine at Com 4, I dont know what is the
problem.

My Sio.Sys driver is loaded in my Config.Sys as follows:

DEVICE=D:\COMM\SIO.SYS (COM1) (COM2,2F8,IRQ3,,F)
(COM4,INTERNET,NONE)

Any help would be appreciated.