Re: MWave Modem (fwd)

[Jay Shaw <jrshaw@wired.com>]

---------- Forwarded message ----------
Date: Mon, 8 Jan 1996 17:35:46 -0800 (PST)
From: Jay Shaw <jrshaw@get.wired.com>
To: "Kurtis D. Rader" <krader@sequent.com>
Subject: Re: MWave Modem

That fixed it.  I just had to run the THinkPad Features program.  Thanks 
for the help

Jay

On Mon, 8 Jan 1996, Kurtis D. Rader wrote:

> At 16:27 08-01-96 -0800, you wrote:
> >I had my Mwave modem running fine until I installed a Megahertz ethernet 
> >card.  I've tried re-installing the mwave drivers at 14.4 and 28.8, but 
> >neither seems to work.  Terminal programs think that the port is invalid 
> >somehow.  Any Ideas?
> 
> I also had major difficulty getting it to work under Win95.  Install the
> MWave v2.00 drivers.  Then use the ThinkPad Features program to enable
> the DSP and MWave on COM2:.  Then use the "Add Hardware" wizard to
> manually add the MWave modem and a standard serial interface (drivers
> are serialui.dll and serial.vxd).  Set the port settings to 115200bps,
> 8bits, no parity, 1 stop, hardware flow control.  I also find it
> necessary to use the "PCIC or compatible PCMCIA controller on IBM
> system" driver for the PCMCIA interface rather than the generic Win95
> PCIC support.
> 
> -- Kurtis D. Rader, x8,3714
> -- Sr. Technical Consultant
> -- (currently in Portland)
> 
>