Raw Emulation Board
Emulation Board Layout
Output of the CAD program showing the Layout of the Emulation Board.
Top View of the Board
The Emulation Board before it has been hooked up and probed.
Connected Up
The IKOS cables can be seen interfacing with the board. Also the SDRAM slots are populated.
RAW Pads Closeup
As a routing study, the Raw profile was put on the Emulation Board as can be seen in the middle of the FPGAs.
Closeup of the Emulator
This is the front of the IKOS 5M emulator.
Cable Congestion
The IKOS emulator connecting to the Raw Emulation Board.
Closeup of the Connectors
The Raw design required 14 100 Pin IKOS connectors and cables to be connected.
Host Connection Cable
The Blue cable in this picture connected the Raw Emulation Board up to a Linux computer allowing the emulated Raw chip to access file and other hosted OS functionality.
Raw Workbench
The Raw debugging workstation.
PCI Slots
The 64 bit PCI slots are the beige slots at the bottom of this photo.
Host Computer
The Linux host computer can be clearly seen in back left of this photo.
Angle View 1
Angle View 2
Distance View 1
Distance View 2
Distance View 3
PCI View 1
Zoom View 1
Zoom View 2
Angle IKOS View 1
Cable View 1
Cable View 2
Top View 1
Vertical View 1