Cilk Plus Installation Guide

From SuperTech Wiki

Jump to: navigation, search

Intel provides a suite of tools for programming Cilk-based programs. The tool set contains the Intel compiler ICC, the parallelism checker Cilkview, the race condition reporter Cilkscreen, the binary-level instrumentation gadget Pintool, the fine-level instrumentation tool Cilkprof. Here is a guide to install them on a 64-bit Linux.

  • Online Resources
  1. Open Source Cilk Plus Website: http://www.cilkplus.org/
  2. Intel Cilk Plus Forum: http://software.intel.com/en-us/forums/intel-cilk-plus
  • Installation
  1. Install ICC or GCC: A free, open-source version is available in the cilkplus branch of GCC.
  2. Installing ICC These instructions assume your shell is bash.
    Prerequisites: You need a license from Intel® in order to install ICC.
    1. Go to http://software.intel.com/en-us/articles/intel-software-evaluation-center/.
    2. Select the Linux version of "Intel® C++ Composer XE" (or any Linux product suite listed as containing "Intel® C++ Composer XE") and download the 64-bit version.
    3. Unpack the downloaded file and run the installation script.
      $ /path/to/unpacked/file/install.sh.
      Note: To allow all users to access ICC on the system, run this install script as root.
    4. Follow the on-screen instructions to install ICC.
    5. Set up your environment variables to use ICC.
      $ source /path/to/intel/bin/compilervars.sh intel64.
  3. Installing GCC: These instructions walk you through checking out and building the cilkplus branch of GCC. Complete instructions for building GCC from source can be found at http://gcc.gnu.org/install/index.html. These instructions will install GCC into a custom directory, gcc-cilk, so as not to overwrite the existing version of GCC on your system.
    Warning: This process takes a while and uses a couple gigabytes of space.
    Prerequisites: You will need the following installed on your system. (For more information non prerequisites, please check http://gcc.gnu.org/install/prerequisites.html.)
    flex or lex
    bison or Yacc
    isl
    make or gmake
    gcc or g++, version 4.4 or above
    autogen
    autoconf, version 2.64
    svn or git
    gmp
    mpfr
    mpc
    1. Check out the latest version of the cilkplus branch of GCC.
      $ svn checkout svn://gcc.gnu.org/svn/gcc/branches/cilkplus gcc-cilk-src
      Note: I encountered problems with my connection timing out when I tried to check out the repository from http://gcc.gnu.org/svn/gcc/branches/cilkplus instead of svn://gcc.gnu.org/svn/gcc/branches/cilkplus. If you encounter similar problems, make sure you are using the "svn" protocol, instead of the "http" protocol. If you have previously checked out the gcc cilkplus source using "http," you can switch your checkout to use "svn" by running the following in the directory containing your checkout.
      $ svn switch --relocate http://gcc.gnu.org/svn/gcc/branches/cilkplus svn://gcc.gnu.org/svn/gcc/branches/cilkplus
    2. Alternatively, you may check out the repository using git:
      $ git clone git://gcc.gnu.org/git/gcc.git gcc-cilk-src
      $ cd gcc-cilk-src
      $ git checkout -b my_cilkplus_branch origin/cilkplus
      $ cd ..
    3. Create two new directories, gcc-cilk-obj and gcc-cilk, in the directory containing gcc-cilk-src.
      $ mkdir gcc-cilk-obj gcc-cilk
    4. Configure GCC as follows.
      $ cd gcc-cilk-obj
      $ ../gcc-cilk-src/configure --prefix=${PWD}/../gcc-cilk --enable-languages=c,c++
      Note:: You may want to add --disable-multilib to the configuration options if multilib is not installed on your system. Otherwise, you may encounter errors such as:
      gnu/stubs-32.h: No such file or directory compilation terminated.
    5. Compile GCC:
      $ make
    6. Install GCC into gcc-cilk:
      $ make install
    7. The new GCC binary is /path/to/gcc-cilk/bin/gcc.
    8. Set up the necessary environment variables. For example, if you are using bash, execute the following, or add these lines to ~/.bashrc to set up these variables automatically when you log in.
      $ export PATH=path/to/gcc-cilk/bin:$PATH
      $ export LD_LIBRARY_PATH=path/to/gcc-cilk/lib
      $ export LIBRARY_PATH=path/to/gcc-cilk/lib
  4. Install LLVM/Clang with Cilk Plus: Please see http://cilkplus.github.io/ for details.
  5. Install the Cilk Plus tools (cilkview and cilkscreen): Download the archive from here: https://www.cilkplus.org/download#block-views-cilk-tools-block-1. Unpack the archive and include the bin directory inside the newly-created directory in your $PATH. For example, if you are using bash, execute the following lines, or add these lines to your ~/.bashrc.
    1. $ export PATH=path/to/cilktools/bin:$PATH
  6. Install Pintool: Download Pin from here: http://www.pintool.org/downloads.html. Unpack the archive.
  7. Install Cilkprof: These instructions include instructions on downloading and installing Pin for Cilkprof. These instructions should work with the latest version of Pin, which is version 62141 at the time these instructions were last updated. These instructions have not necessarily been tested on newer version of Pin, however.
    1. Change to the directory cilkprof/install/dir in which you would like to install Cilkprof.
      $ cd cilkprof/install/dir
    2. Create a directory 3rdparty inside of cilkprof/install/dir.
      $ mkdir cilkutil 3rdparty
    3. Download Pin for Linux from http://www.pintool.org/downloads.html, and place the downloaded archive into 3rdparty.
    4. Download libzca from http://cilkplus.org/download, and place the downloaded archive into the current directory, cilkprof/install/dir.
    5. Unpack the Pin archive inside of 3rdparty.
    6. Create a symbolic link called pintool to the directory created by unpacking the archive.
    7. If you do not have the necessary permissions to access the intel64 subdirectory inside of pintool, run $ chmod -R 755 intel64.
    8. Unpack the libzca archive inside of cilkprof/install/dir. Create a symbolic link called cilkutil to the directory created by unpacking this archive.
    9. Build libzca and cilkprof.
      $ cd cilkutil
      $ make (You will need a version of gcc and a version of icc to complete this compilation.)
    10. Download the cilkprof script from http://web.mit.edu/neboat/www/code/cilkprof, and place it in a directory in your PATH environment variable. For example, place it within the same directory as cilkview and cilkscreen.
    11. Set the CILKUTIL environment variable to point to the cilkutil directory. For example, if your shell is bash, add the line export CILKUTIL=/path/to/cilkutil to your .bashrc.
  • Usage
    • Compile with ICC: $ icc cilkprogram.cpp -o cilkprogram
    • Compile with GCC: $ g++ cilkprogram.cpp -o cilkprogram -lcilkrts -ldl
    • Check parallelism: $ cilkview ./cilkprogram
    • Check race condition: $ cilkscreen ./cilkprogram
    • Pintool: Please see the Pin manual, e.g. http://software.intel.com/sites/landingpage/pintool/docs/62141/Pin/html/.
    • Linux perf tool:
      • Show list of counters: $ perf list
      • check L1 data load miss: $ perf stat -c L1-dcache-load-misses ./cilkprogram
    • Cilkprof: $ cilkprof ./cilkprogram
      • This command generates two csv output files, cilkprogram.bb.csv and cilkprogram.cc.csv, containing work and span profiling data for your Cilk program. At this time, the data in these files are most easily perused using your favorite spreadsheet program. For more information on configuring the output of Cilkprof, run $ cilkprof -h.
Personal tools
Members Only
Off Topic